Television; I.link (Ieee1394) - Toshiba Tecra A7 User Manual

If you have selected
HW Setup, both the external monitor and the internal LCD will be active
when you turn on the computer. If
external monitor will be active.
To change the display settings, press Fn + F5. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F5 to switch
to the internal display. Refer to Chapter 5,
using hot keys to change the display setting.
If you set Simultaneous for the computer's display, you must set the
computer's display resolution to the same as that of the external monitor or
other device, such as a projector.

Television

A television can be connected to the video out port on the computer. To
connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.

i.LINK (IEEE1394)

Some models are equipped with a i.LINK.
i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
1. Digital video cameras
2. Hard disk drives
3. MO drives
4. CD-RW drives
User's Manual
Simultaneous
VIDEO out port
under the
Auto-Selected
The
Connecting a television
Optional Devices
Display options of the
is selected, only the
Keyboard, for details on
8-13