Replacing The Cap; Using The Usb Diskette Drive - Toshiba Tecra A7 User Manual

Replacing the Cap

The AccuPoint cap is an expendable item that should be replaced after
prolonged use
1. To remove the AccuPoint cap, firmly grasp the cap and pull it straight up.
Touch Pad
2. Position a new cap on the peg and press it into place.
The peg is square, so be careful to align the cap's square hole with the
peg.

Using the USB diskette drive

A 3 1/2" diskette drive connects to the computer's USB port.
It accommodates 1.44-megabyte or 720-kilobyte diskettes.
Refer to Chapter 2,
Connecting 3 1/2" diskette drive
To connect the drive, plug the diskette drive connector into a USB port.
Refer to the figure below.
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.
User's Manual
Removing the AccuPoint cap
The Grand Tour, for more information.
Operating Basics
PEG
4-3