Dual Pointing Device; Touch Pad/Accupoint - Toshiba TECRA M5 User Manual

Dual Pointing Device

If you are using a USB mouse, also refer to the
chapter and to your mouse documentation.

Touch Pad/AccuPoint

Problem
Either the Touch Pad
or the AccuPoint does
not work.
On-screen pointer
does not respond to
Pad operation
The mouse pointer
moves too fast or too
slow
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
User's Manual
Procedure
Check the Device Select settings. Click start,
click Control Panel, click Printers and Other
Hardware and select Mouse icon. Open the
Mouse Properties and click Dual Pointing
Device tab. Then click the Detail Setting button
and click the Device Select tab.
Check that the Touch Pad is not selected.
Pressing Fn + F9 to enables TOSHIBA Dual
Pointing Device.
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to return to its
normal shape and try again to move it.
Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as required and click OK.
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as required and
click OK.
If problems persist, contact your dealer.
Troubleshooting
USB device section in this
9-13