Page 1 Tecra M5 Series ® User’s Guide If you need assistance: Toshiba’s Support Web site pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information see page 222 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Web site at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares, that the product: PLU10* conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 23 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 TouchPad is a trademark of Synaptics, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...42 Precautions...42 Important information on your computer’s Setting up your computer ...45 Setting up your software...46 Registering your computer with Toshiba ...47 Adding external devices ...47 Connecting to a power source ...48 Using the main battery...51 cooling fan ...45...
Page 27 Using the computer for the first time ...52 Opening the display panel ...52 Your computer’s features and specifications ...53 Turning on the power...53 Using the Toshiba Dual Pointing Device ...54 Using the TouchPad™...55 Disabling or enabling the Dual Pointing Device.56 Adding memory (optional) ...57 Installing a memory module ...57...
Page 28 Contents Options for turning off the computer ...84 Using the Turn Off Computer or Shut Down Using and configuring Hibernation mode ...89 Using and configuring Standby mode...91 Closing the display panel ...92 Caring for your computer...93 Cleaning the computer ...93 Moving the computer...93 Using a computer lock ...93 Chapter 2: Learning the Basics...
Page 29 Removing a disc with the computer on...114 Removing a disc with the computer off ...114 Caring for CD or DVD Discs ...115 Toshiba’s online resources ...115 Chapter 3: Mobile Computing ... 116 Toshiba’s energy-saver design...116 Running the computer on battery power ...116 Battery Notice ...117...
Page 30 Contents Chapter 4: Exploring Your Computer’s Features... 135 Exploring the desktop ...135 Finding your way around the desktop ...136 Setting up for communications...138 Determining the COM port ...139 Connecting the modem to a telephone line ...140 Connecting your computer to a network ...141 Using the Ethernet LAN Port ...142 An overview of using the Internet ...143 The Internet ...143...
Page 31 Using drag-and-drop to assign a key ...176 Using the keyboard or pointing device to Viewing existing key assignments ...178 Changing or removing existing key TOSHIBA Hotkey Utility ...178 TOSHIBA SD™ Memory Card Format Utility ...179 TOSHIBA SD™ Memory Boot Utility...180 SD card ...157 ® modules ...158 ®...
Page 32 TOSHIBA Button Controls ...191 TOSHIBA Mic Effect ...192 CD/DVD Drive Acoustic Silencer ...193 TOSHIBA Accessibility ...194 TOSHIBA Touch and Launch utility ...195 TOSHIBA Touch and Launch Settings...197 Disabling or enabling TOSHIBA Touch Trusted Platform Module (TPM) ...199 Fingerprint Authentication Utility...200 Fingerprint Enrollment ...200...
Page 33 Disabling the user-level password ...214 Using the power-on (user-level) password ...215 Using the instant (user-level) password...215 Using the HDD password...215 Setting a hard disk drive user only Deleting or changing a hard disk drive Setting a hard disk drive master and user Changing the master and user passwords Chapter 7: If Something Goes Wrong ...
Page 34 Data and system configuration backup in If you need further assistance...262 Before you contact Toshiba ...262 Contacting Toshiba ...263 Other Toshiba Internet Web sites ...264 Toshiba’s worldwide offices...264 Appendix A: Hot Keys ... 266 Volume Mute ...266 Password security ...267 Without a password ...267...
Page 35 Appendix C: Using ConfigFree™ with your Toshiba Computer ... 276 Getting Started...277 Starting ConfigFree ...277 ConfigFree Utilities...279 Connectivity Doctor ...279 Search for Wireless Devices ...282 Profile Settings ...287 ConfigFree SUMMIT...291 Quick Connect...295 Using the Automatic Switch...298 Semi-Automatic Switch Feature ...298 Glossary...300...
Page 36: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your new Toshiba notebook computer, your work and entertainment can accompany you wherever you Certain Microsoft NOTE computer may use technological measures for copy protection. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE PRODUCT IF YOU DO NOT FULLY COMPLY WITH THE PRODUCT ACTIVATION PROCEDURES.
Page 37: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 38: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 39: Other Icons Used
Your computer comes with the following documentation: An electronic version of the user’s guide It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com. Introduction Other documentation...
Page 40: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 222. “If...
Page 41: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 42: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 43 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 44 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card.
Page 45: Important Information On Your Computer's Cooling Fan
Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 46: Setting Up Your Software
Getting Started Setting up your computer telephone line or establish a Local Area Network (LAN) connection. See on page 140 Setting up your software NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup choices.
Page 47: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 48: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 49 Power cord/cable Sample power cord/cable and AC adapter cord To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 50 Getting Started Connecting to a power source Sample connecting the AC adapter to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows green. Never tamper with the cord/cable or plug; never splice or alter a cord/cable;...
Page 51: Using The Main Battery
Is unlit when the main battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter NOTE If the AC power light flashes amber during charging,...
Page 52: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time Opening the display panel Slide the display latch to the right. Lift the display panel. Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel.
Page 53: Your Computer's Features And Specifications
Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 54: Using The Toshiba Dual Pointing Device
Getting Started Using the Toshiba Dual Pointing Device Sample turning on the power The preinstalled operating system loads automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 55: Using The Touchpad
Because the TouchPad is much smaller than the display NOTE screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the desired direction. Using the Toshiba Dual Pointing Device II pointing device—Moves the cursor and Getting Started...
Page 56: Disabling Or Enabling The Dual Pointing Device
Getting Started Using the Toshiba Dual Pointing Device Once you have positioned your cursor, you can either click it into place by double-tapping the TouchPad or clicking the control buttons. Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button.
Page 57: Adding Memory (Optional)
For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of your computer.
Page 58 Getting Started Adding memory (optional) Installing a memory module with the computer’s power on may damage the computer, the module, or both. The computer has two memory module slots — Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu.
Page 59 Sample base of the computer Using a standard Phillips No. 1 screwdriver, loosen the captive screw that secures the memory slot cover. Front of computer Sample removing the memory slot cover screws Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 60 Getting Started Adding memory (optional) Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Page 61 Hold the memory module by its edges so that the gold connector bar faces the slot, at a slight angle to the socket. clip Sample inserting the memory module into the socket Check that the module is inserted completely into the socket and lined up squarely with the socket clips.
Page 62: Removing A Memory Module
Getting Started Adding memory (optional) Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. The clips on either side of the memory module snap into place when the memory module is properly inserted.
Page 63 Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 64 Getting Started Adding memory (optional) Replace the memory module slot cover and tighten the screw. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer.
Page 65: Hard Drive Recovery Utilities
Hard Drive Recovery Utilities Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities. Back up your data externally before performing any of the tasks in this section.
Page 66 The system will prompt you to insert the appropriate amount of NOTE CDs or DVDs to copy the Hard Drive Recovery Utilities. If your optical disk drive is not writable, contact TOSHIBA Customer Support to obtain the Recovery media for your system. To create recovery CDs/DVDs: Double-click the Recovery Disc Creator icon on the Windows desktop.
Page 67: Hard Disk Drive Recovery Using The Recovery Partition
Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA Recovery Wizard screen displays. Sample TOSHIBA Recovery Wizard screen Getting Started Hard Drive Recovery Utilities “Hard Disk Drive...
Page 68 Be sure to save your work on external media before proceeding. On the TOSHIBA Recovery Wizard screen, select Recovery of Factory Default Software, then click Next. The Recovery of Factory Default Software screen appears.
Page 69 The Recovery Wizard allows you to delete all data and partitions from the hard disk. To delete the data and partitions from your hard disk: On the TOSHIBA Recovery Wizard screen, select Erase the hard disk, then click Next. The next screen lists the two methods you can choose: Delete all data and partitions from the hard disk—...
Page 70 To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 71 To resize and recover your C: drive: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all information will be lost during the recovery process.
Page 72: Hard Disk Drive Recovery Using The Recovery Media
65): Insert the first recovery CD or DVD into your CD/DVD drive and power on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image...
Page 73 To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 74 To recover your C: drive without the recovery partition: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all data will be lost during the recovery process.
Page 75: Deleting The Hard Disk Recovery Utility
Deleting the Hard Disk Recovery Utility You can delete the HDD recovery partition without losing your data. Click Start, All Programs, Hard Disk Recovery Utilities, then Delete Hard Disk Recovery Partition. The Delete Hard Disk Recovery Utility warning screen displays. Sample Delete Hard Disk Recovery Utility screen Click OK to continue.
Page 76: Installing Drivers And Applications
PS2 port of an optional Advanced Port Replicator III+. Making your external keyboard emulate the Fn key An external keyboard does not have the the computer’s built-in keyboard. You can use the Emulation option in TOSHIBA Hardware Setup to assign an key provided by...
Page 77: Connecting An External Mouse
In Toshiba Hardware Setup, you can emulate the setting key combinations in the keyboard option of the utility. “TOSHIBA Hardware Setup” on page 185 information. The Fn emulation key is not supported when using a USB NOTE keyboard.
Page 78: Connecting A Printer
Getting Started Connecting a printer Connecting a printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 79: Setting Up A Printer
Setting up a printer Some printers require a specific installation process. Refer to NOTE your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once.
Page 80: Using External Display Devices
To connect a device to the S-video port, you must purchase an S-video cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 81 Connecting to the S-video port Video cables are not included with your computer. To connect NOTE a device to the S-video port, you must purchase an S-video cable. Connect one end of the S-video cable to the external video device. Refer to the documentation provided with the device for the location of its S-video in port.
Page 82: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 83: Adjusting The Quality Of The External Display
Adjusting the quality of the external display To obtain the best picture quality from your external display device, you may need to adjust the video settings. See the documentation supplied with the device for additional configuration steps. TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 84: Turning Off The Computer
Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows work. Make sure the system indicator panel’s disk light and the drive-in-use light are off. If you turn off the power while a disk is being accessed, you may lose data or damage the disk and/ or drive.
Page 85: Hibernation Mode
turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 86: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer Standby mode The Standby command places the computer into a power- saving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: While in Standby mode, the computer uses some main battery power.
Page 87 Turning off the computer more quickly You can also turn off the computer by pressing the power button. To use this method, you first need to activate it using Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Getting Started Turning off the computer ®...
Page 88 Getting Started Turning off the computer Click the Toshiba Power Saver icon. Click on the Setup Action tab. Sample setup action settings screen Select the options you want from the drop-down lists. When I press the power button Set this option to Shut down if you want the computer to shut down when you press the power button.
Page 89: Using And Configuring Hibernation Mode
Hibernation mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance.
Page 90 Getting Started Turning off the computer Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. When I press the power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button.
Page 91: Using And Configuring Standby Mode
To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. Click Start, Control Panel, then click Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Standby for the options you want. When I press the power button...
Page 92: Closing The Display Panel
Click OK. For more information about the Power Saver utility, see NOTE “TOSHIBA Power Saver” on page Once the computer is configured, you can place it into Standby mode by either pressing the power button or closing the display panel, depending on the Standby options set.
Page 93: Caring For Your Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Getting Started Caring for your computer...
Page 94 Getting Started Caring for your computer Sample computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop.
Page 95: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists computing tips and provides important information about the system’s basic features. Computing tips Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the hard disk. You will lose all unsaved work if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 96 Learning the Basics Computing tips If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy. Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. Consult your operating system documentation for more information on these and other utilities.
Page 97: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows provide all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just passing over an area of the page.
Page 98: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard of the specially marked keys on your computer’s built-in keyboard allows you to emulate a full-size keyboard. The emulation Fn key and the Wake up on Keyboard while in NOTE Standby mode are only functional when using the internal keyboard;...
Page 99: Windows ® Special Keys
through programmed functions when pressed. Used in combination with the specific functions on the computer. For more information see ® “Fn-esse ” on page Hot keys When used in combination with the marked with icons run programmed functions specific to your computer.
Page 100: Using The Overlay To Type Numeric Data
Learning the Basics Using the keyboard Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously.
Page 101: Starting A Program
To turn off the numeric overlay, hold down the press again. The numeric mode light on the keyboard indicator panel goes out. Using the cursor control overlay To turn on the cursor control overlay, press simultaneously. The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on.
Page 102: Starting A Program From The Start Menu
Learning the Basics Starting a program Use Windows Use the Run dialog box. The next three sections explain how to start a program from the Start menu, Explorer, and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu.
Page 103: Starting A Program From The Run Dialog Box
Click Start, All Programs. Click Accessories. Click Windows Explorer. In the left pane of the window, click My Computer to expand the window. In the left pane of the window, click Local Disk (C:). In the left pane of the window, click the folder containing the program, in this case Program Files.
Page 104: Saving Your Work
Learning the Basics Saving your work Sample Run dialog box In the Run dialog box: For a program in the Windows program name. Otherwise, if you know the program’s location, type the full file path. Then click OK. If you do not know the program’s location, you can search for it by clicking Start, and then Search.
Page 105: File Names
Many programs offer a feature that saves documents at regular intervals, such as every 15 minutes. Check your programs’ documentation to see whether they have an automatic save feature. To save: A file you are updating, open the program’s File menu and click Save.
Page 106: Printing Your Work
Learning the Basics Printing your work unlikely to recognize an unusual extension and may refuse to handle your file correctly. TECHNICAL NOTE: By default, the Windows system does not show file extensions. For information on showing or hiding file extensions, see your Windows online help.
Page 107: Restoring Your Work
Using the CD-RW/DVD-ROM or multi-function drive hard disk. Also see Windows XP” on page HINT: Backing up all the files on your hard disk may take a considerable amount of time and multiple CDs/DVDs. You may prefer to use a high-capacity backup system, such as an external hard drive.
Page 108: Cd-Rw/Dvd-Rom Or Multi-Function Drive Components
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive For the prior reasons, your computer may come with a DVD- ROM drive or multi-function drive. TECHNICAL NOTE: Your CD-RW/DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region.
Page 109: Inserting A Compact Disc
Using the CD-RW/DVD-ROM or multi-function drive Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.
Page 110 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Grasp the tray and pull it fully open. Sample drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in CD or DVD Discs”...
Page 111: Playing An Audio Cd
Using the CD-RW/DVD-ROM or multi-function drive Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact your network administrator for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 112: Playing Cds Using Auto-Run
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Stop button Play/pause button Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: To play the CD or to pause, click the Play/pause button. To stop the CD, click the Stop button.
Page 113: Creating A Cd
PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific format compatibilities.
Page 114: Removing A Disc With The Computer On
Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Removing a disc with the computer on To remove a compact disc (CD or DVD) with the computer turned on: Press the eject button on the drive. Do not press the eject button while the in-use indicator light is glowing.
Page 115: Caring For Cd Or Dvd Discs
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 116: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 117: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 118: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 119: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’ s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 120: Charging The Rtc Battery
Mobile Computing Charging batteries To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius). The battery is almost completely discharged. Leave the power connected and the battery should begin charging after a few minutes.
Page 121: Monitoring Main Battery Power
To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours. It is seldom necessary to charge the RTC battery because NOTE it charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working.
Page 122 Mobile Computing Monitoring main battery power Flashes amber when the main battery charge is low and it is time to recharge the main battery or plug in the AC adapter. If the AC power light flashes amber during charging, either the NOTE battery pack is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 123: Determining Remaining Main Battery Power
Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties The remaining battery charge is indicated on the left side of the dialog box.
Page 124: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 125: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. The TOSHIBA Power Saver Properties window appears. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 126: Power Profiles
Mobile Computing Monitoring main battery power Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 127: Using A Hot Key To Set The Power Profile Mode
The pop-up window disappears. You are now in the selected mode. For more information on setting the properties of the Power Profile modes, see Monitoring main battery power simultaneously to display the Power Profile key. “TOSHIBA Power Saver” on page Mobile Computing , press until the desired 182.
Page 128: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack. Never expose a battery pack to abnormal shock, vibration or pressure.
Page 129 Slide the battery lock to the left. Sample unlocking the battery Slide the battery release latch to right. While holding the release latch, pull the discharged battery out of the computer. Sample releasing and removing the battery Mobile Computing Changing the main battery...
Page 130: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 131: Taking Care Of Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. Mobile Computing Taking care of your battery 128.
Page 132: Maximizing Battery Life
Mobile Computing Taking care of your battery A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. Charge the battery only in the computer or in a battery charger designated as an approved option.
Page 133: Disposing Of Used Batteries
Charge the battery pack until the battery light glows green. If you have extra battery packs, rotate their use. If you will not be using the system for an extended period, more than one month, remove the battery pack. Disconnect the AC adapter when the battery is fully charged.
Page 134: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 135: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore other features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows programs, find documents, set up system components, and perform most other computing tasks.
Page 136: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Sample Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 137: Start Button
The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 138: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 139: Determining The Com Port
A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet There are many other ways to connect to the Internet in NOTE addition to those discussed in this section. For troubleshooting information related to this topic, see “Modem problems”...
Page 140: Connecting The Modem To A Telephone Line
Modem options box. Close the Control Panel. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem provides an RJ11 jack which allows you to connect the modem to a standard voice-grade telephone line.
Page 141: Connecting Your Computer To A Network
Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Never connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
Page 142: Using The Ethernet Lan Port
Exploring Your Computer’s Features Setting up for communications Using the Ethernet LAN Port When your computer starts, the Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply. To avoid this delay, you can configure the Windows system to disable the LAN port.
Page 143: An Overview Of Using The Internet
For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator. To use your wireless communication, slide the wireless on/off switch to the On position. When the Wi-Fi antenna switch is on, the wireless indicator NOTE light in the system indicator panel will be lit.
Page 144: The World Wide Web
Exploring Your Computer’s Features An overview of using the Internet The World Wide Web The World Wide Web (or ‘Web’) is a subset of the Internet — a collection of interlinked documents (located on computers connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP).
Page 145: Surfing The Internet
Once you have established an ISP account, you can connect to the Internet. Connect your computer’s modem to a telephone line. For more information on connecting to a modem see “Connecting the modem to a telephone line” on page 140. Start your Web browser.
Page 146: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features An overview of using the Internet If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service. Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas can communicate in real-time, one-on-one or in groups, by typing messages...
Page 147: Exploring Audio Features
The computer plays sounds through the internal speakers. It uses the sound settings in your operating system, except for the system speaker, which is configured by the Toshiba System utility. To adjust the volume, click the speaker icon in the taskbar.
Page 148: Recording Sounds
Exploring Your Computer’s Features Exploring audio features To adjust the volume: For external speakers, use the volume control on the speakers in conjunction with the volume control on the computer. For headphones, use the computer’s volume control dial. Recording sounds You may record sounds and save them as .wav files using the built-in microphone or an external microphone.
Page 149: Connecting An External Microphone
Positioning Sample Sound Recorder screen Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. NOTE When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu.
Page 150: Using An Expansion Device
For more information, see the accessories information package that comes with the device or visit accessories.toshiba.com. Using an optional Advanced Port Replicator III+ with your computer If you purchase an optional Advanced Port Replicator III+ (APR III+) (not shipped with your system), you can connect this device to your computer’s expansion port.
Page 151: Using The I.link ® Port
Using the i.LINK The i.LINK extremely fast data transfer rate. In addition to high speed, the i.LINK isochronous data transfer (the delivery of data at a guaranteed rate.) This makes it ideal for devices that transfer high levels of data in real-time, such as video devices. As with USB ports, the i.LINK Play (automatic configuration) and hot swapping (the ability to connect and disconnect devices while the computer is on).
Page 152: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Before inserting a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert a PC Card: Locate the PC Card slot on the left side of the computer. Insert the PC Card.
Page 153: Setting Up A Pc Card For Your Computer
Sample removing a PC Card Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them. Others, such as hard disk cards, network cards, and SCSI adapters, may need to be set up to work with your computer. To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online help.
Page 154: Removing An Expresscard
Exploring Your Computer’s Features Using an ExpressCard™ Sample inserting an ExpressCard When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing an ExpressCard Prepare the card for removal by right-clicking on the Safely Remove Hardware icon on the system tray and then selecting...
Page 155: Using An Sd® Card
During installation of the SD card drivers, one or more dialog boxes may appear indicating that the driver is not digitally signed. The message may appear as “Digital Signature not found (About Secure Digital Emulation from Toshiba).” Click Yes to continue. Inserting an SD card...
Page 156: Formatting An Sd Card
You could expose the storage area to static electricity, which can destroy data. Formatting an SD card To format an SD card, use the Toshiba SD Memory Card Format utility. Click on Start, All Programs, Toshiba, Utilities, and then click on SD Memory Card Format.
Page 157: Using Standby Or Hibernate While Using The Sd Card
Stopping or removing the SD card after formatting If you have formatted the SD card drive with the Windows operating system format (see Formatting an SD Card in the preceding section), you may be unable to stop or eject your card.
Page 158: Using Slim Selectbay Modules
Exploring Your Computer’s Features Using Slim SelectBay® modules The device name disappears only after you have physically removed the card from your computer. Removing the SD card without the eject utility may result in lost data on your SD card. Do not remove memory media while data is being written or read.
Page 159: Removing A Module From The Slim Selectbay
HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit accessories.toshiba.com. Removing a module from the Slim SelectBay Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself.
Page 160: Inserting A Module Into The Slim Selectbay
Exploring Your Computer’s Features Using Slim SelectBay® modules Slide the Slim SelectBay module out of the computer. Sample removing the Slim SelectBay module If you are removing the weight saver, retain it for transporting the computer when no other module is installed in the Slim SelectBay.
Page 161: Chapter 5: Toshiba Utilities
Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: TOSHIBA Assist TOSHIBA Application Installer Setting passwords...
Page 162: Toshiba Assist
The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: Press the TOSHIBA Assist button located above the keyboard. Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 163: Connect
Sample TOSHIBA Assist window The TOSHIBA Assist offers four categories of options: Connect Secure Protect & Fix Optimize Connect The features available in this category are: ConfigFree™ Bluetooth Bluetooth Local COM Settings Connectivity Doctor Settings ® Toshiba Utilities TOSHIBA Assist...
Page 164: Secure
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist – Connect tab Secure The features available in this category are: User password Supervisor password Sample TOSHIBA Assist window – Secure tab...
Page 165: Protect & Fix
Protect & Fix The features available in this category are: PC Diagnostic Tool Utility HDD Protection Utility Sample TOSHIBA Assist window – Protect & Fix tab Optimize The features available in this category are: Hotkey assignment using TOSHIBA Hotkey Utility TOSHIBA SD™...
Page 166: Toshiba Application Installer
CD/DVD Drive Acoustic Silencer TOSHIBA Accessibility Sample TOSHIBA Assist window – Optimize tab TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer. To reinstall drivers and applications:...
Page 167: Setting Passwords
Sample TOSHIBA Application Installer screen Click the item(s) you want to install. To select multiple items, hold down the Sample TOSHIBA Application Installer selection screen Click Install, then follow the on-screen prompts to complete the installation process. Setting passwords Setting a password lets you walk away from your computer, secure in the knowledge that nobody can access your files.
Page 168: Using An Instant Password
Toshiba Utilities Setting passwords Toshiba supports several types of passwords on your computer: An instant password—Secures your open programs and files when leaving the computer temporarily (the user password supports this function). A supervisor password—Prohibits unauthorized users from accessing certain functions such as TOSHIBA HW Setup.
Page 169: Setting A Supervisor Password
Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 170 Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the computer.
Page 171: Toshiba Password Utility
Select Verify by Password. Type the correct password. Click Delete. Click OK. TOSHIBA Password Utility The TOSHIBA Password Utility allows you to set a user- level password in TOSHIBA Assist or in System Setup. To use the TOSHIBA Password utility: Start TOSHIBA Click the Secure tab, then double-click the User Password icon.
Page 172: Pc Diagnostic Tool Utility
Click OK to exit. If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 173: Hdd Protection Utility
AC power and battery power operation. To use the HDD Protection utility: Click Start, All Programs, Toshiba, Utilities, then HDD Protection, or double-click the HDD Protection icon in the Protect & Fix tab of...
Page 174: Fn-Esse
Set the battery and AC power detection levels as desired. Click OK. ® Fn-esse Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any Windows For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer.
Page 175: Starting Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, All Programs, Toshiba, Utilities, Fn-esse, or double-click the Hotkey Assignment icon in the Optimize tab of TOSHIBA The Fn-esse keyboard appears.
Page 176: Using Drag-And-Drop To Assign A Key
Toshiba Utilities Fn-esse Using drag-and-drop to assign a key To assign a key to open a program or document: Start both Fn-esse and Windows supporting drag-and-drop). Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at the same time.
Page 177 To create a popup list with items from various folders, or to pick only a few items from a folder, create a new folder containing only the desired programs and documents. If Toshiba Utilities Fn-esse “Making a direct key assignment”...
Page 178: Viewing Existing Key Assignments
To remove the key assignment, click Clear. TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility:...
Page 179: Toshiba Sd™ Memory Card Format Utility
This utility is used to format SD cards used with the Bridge Media Adapter Slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, SD Memory Card Format utility, or double-click the SD Memory Card icon in the Optimize tab of The SD Memory Card Format screen appears.
Page 180: Toshiba Sd™ Memory Boot Utility
Toshiba Utilities TOSHIBA SD™ Memory Boot Utility Sample SD Memory Card Format screen Select the drive corresponding to the SD memory card. Select the formatting option: Quick Format Full Format Click Start to begin formatting. The formatting progress is displayed in the horizontal bar in the window.
Page 181 Click Start, All Programs, Toshiba, Utilities, SD Memory Card, or double-click the SD Memory Card icon in the Optimize tab of The TOSHIBA SD Memory Boot Utility screen appears. Sample TOSHIBA SD Memory Boot Utility screen Select the drive where the SD card is located.
Page 182: Booting From A Bootable Sd Card
Use the arrow keys to select the SD/Floppy icon. Press the TOSHIBA Power Saver The TOSHIBA Power Saver is used for power management, enabling you to control your computer’s power usage, regardless of the source, and use the many preset power profiles, or create one yourself.
Page 183: Preset Power Profiles
The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window The Profile panel on the left of the TOSHIBA Power Saver Properties window shows the power profiles used to control power usage for both AC power and battery power, as well as the estimated battery life for each power profile mode.
Page 184: Quickly Creating A New Power Profile
Toshiba Utilities Mouse Utility These profiles cannot be deleted. It is not recommended to change the settings of these profiles. If you need a custom profile, create a new profile with the properties you require. The DVD Playback profile applies only when a DVD program is playing while running the computer on battery power.
Page 185: Toshiba Hardware Setup
Hardware You may see additional categories depending on your particular pointing device. For information on these settings, “Using the Toshiba Dual Pointing Device” on page Adjust the settings as desired, then click OK. TOSHIBA Hardware Setup TOSHIBA Hardware Setup is the Toshiba configuration management tool.
Page 186 Toshiba Utilities TOSHIBA Hardware Setup The TOSHIBA HW Setup screen appears. Sample TOSHIBA HW Setup screen – General tab options The TOSHIBA HW Setup screen has the following tabs: General—Allows you to view the current BIOS version or change certain settings back to their default values Device Config—Shows the Device configuration options...
Page 187 USB—Allows you to enable or disable USB Legacy Emulation LAN—Allows you to set networking functions By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Toshiba Utilities TOSHIBA Hardware Setup function key and access the...
Page 188: Toshiba Mobile Extension
TOSHIBA Mobile Extension To adjust the settings for docking or using the Slim SelectBay or an expansion, use the TOSHIBA Mobile Extension utility. To use the TOSHIBA Mobile Extension utility: Click Start, Control Panel, Performance and...
Page 189: Toshiba Zooming Utility
Sample Display Change Service tab options For more information about expansion devices, see Slim SelectBay® modules” on page TOSHIBA Zooming Utility This utility allows you to select which applications will work with the zoom in/out hot keys (see You may select all applications or any subset of the...
Page 190 The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. TOSHIBA Assist.
Page 191: Toshiba Button Controls
TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the TOSHIBA Assist and TOSHIBA Presentation buttons. Those buttons are located to the left of the keyboard. To access TOSHIBA Button Controls: Double-click the TOSHIBA Button Control icon in the Optimize tab of The TOSHIBA Controls Properties window appears.
Page 192: Toshiba Mic Effect
Toshiba Utilities TOSHIBA Mic Effect TOSHIBA Mic Effect The TOSHIBA Mic Effect utility helps reduce background noise and increase voice clarity when you use a microphone and speakers at the same time, as in voice chat using third party software.
Page 193: Cd/Dvd Drive Acoustic Silencer
Click Set Quiet Mode to make the drive run more slowly and quietly, for listening to music or audio files on a CD. Click Set Normal Mode to run the drive at normal speed, for transferring data. Toshiba Utilities CD/DVD Drive Acoustic Silencer TOSHIBA Assist.
Page 194: Toshiba Accessibility
Toshiba Utilities TOSHIBA Accessibility TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 195: Toshiba Touch And Launch Utility
A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon’s function.
Page 196 If the icon is highlighted in orange and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window closes. If the icon is highlighted in blue and selected, the function corresponding to the selected icon launches and the TOSHIBA Touch and Launch window remains open.
Page 197: Toshiba Touch And Launch Settings
TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcuts:...
Page 198: Disabling Or Enabling Toshiba Touch And Launch
The Option button allows you to define how folders will open, define visual effects and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.
Page 199: Trusted Platform Module (Tpm)
Trusted Platform Module (TPM) This section only applies to systems with TPM. NOTE Your Toshiba computer includes the TPM (Trusted Platform Module) which is a security encryption device for your system’s hard disk drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 200: Fingerprint Authentication Utility
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Authentication Utility The fingerprint authentication utility can be used to replace the keyboard-based user/BIOS password authentication system when booting up. The fingerprint authentication utility can also be used for user logon. The user’s fingerprint is read; if the system recognizes the fingerprint, the user is automatically logged on.
Page 201 Swipe your finger again in a straight line. Error reading fingerprint—the movement was too fast. Swipe your finger again at a slower speed. Error reading fingerprint—the movement was too short. Swipe your finger again using a longer motion. Toshiba Utilities Fingerprint Authentication Utility...
Page 202: Fingerprint Logon
Toshiba Utilities Fingerprint Authentication Utility Fingerprint Logon The fingerprint utility enables logon to your computer using fingerprints. During user enrollment, fingerprint samples are saved and associated with the user’s Windows When the user attempts to log on again, the user’s fingerprint is read and compared with the user’s enrolled fingerprints;...
Page 203 Boot button to delete the fingerprint from the fingerprint device memory. The fingerprint device memory can typically hold up to 21 fingerprints. The number of slots remaining is displayed in the enrollment wizard. Toshiba Utilities Fingerprint Authentication Utility ® logon password.
Page 204: Control Center
Toshiba Utilities Fingerprint Authentication Utility Control Center The Control Center contains various functions for fingerprint management and for setting up your fingerprint software. Available options depend on the software status, used hardware, and installed applications. Fingerprints Enroll or Edit Fingerprints—Runs the fingerprint enrollment wizard.
Page 205: Fingerprint Utility Limitations
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 206 Toshiba Utilities Fingerprint Authentication Utility your fingerprint on the sensor. Registered Web sites can also be accessed directly from the Biomenu. Supported browsers are: Internet Explorer 5.0 and higher Netscape 7.0 - 7.2 Firefox 1.0.x Biomenu Biomenu provides access to the utility’s features and settings.
Page 207 If a page contains several forms, replaying works as follows: If only one form is registered for the page (regardless of how many forms the page has), that registration is replayed. Toshiba Utilities...
Page 208 Toshiba Utilities Fingerprint Authentication Utility If the page has multiple registered forms, and one of the registered forms is active, the active form is replayed. If the page has multiple registered forms, but there is no active form, all existing registered forms for the page are displayed.
Page 209: Care And Maintenance Of Your Fingerprint Reader
Do not paste stickers or write on the sensor. Do not touch the sensor with a finger or any object with built-up static electricity. Toshiba Utilities Fingerprint Authentication Utility...
Page 210 Toshiba Utilities Fingerprint Authentication Utility Observe the following before you swipe your finger on the sensor, whether for fingerprint enrollment/registration or recognition. Wash and dry your hands thoroughly. Remove static electricity from your fingers by touching any metal surface. Static electricity is a common cause of sensor failures, especially during dry seasons such as winter.
Page 211: Fingerprint Reader Limitations
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 212: Chapter 6: Keeping Your Files Safe
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports the following types of passwords on your computer: A power-on password—Prevents unauthorized users from starting or restarting the computer.
Page 213: User-Level Passwords
HARD DISK AGAIN unless you have set a hard disk drive mas- ter password and you remember that password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
Page 214: Setting A User-Level Password
Password Utilities. Open the User Password tab. Click Delete. A Delete User Password dialog box appears. Type in the password and click Delete. Click OK at the bottom of the Toshiba Password Utility window. The user password is disabled.
Page 215: Using The Power-On (User-Level) Password
Using passwords in the Windows® operating system Using the power-on (user-level) password Whenever you start your computer with a power-on (user- level) password in effect, the computer prompts you to enter the password before it goes through its normal startup procedure.
Page 216: Setting A Hard Disk Drive User Only Password In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system it is removed and installed on another computer. This password does not encrypt data on the hard disk. Setting a hard disk drive master password lets you bypass the hard disk drive user password and access your hard disk, in case you forget the hard disk drive user password.
Page 217: Deleting Or Changing A Hard Disk Drive User Only Password In System Setup
Using passwords in the Windows® operating system illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press The System Setup screen appears. Press screen. Press the spacebar to select User Only password mode. Press the down arrow key to move to the User Password section.
Page 218: Setting A Hard Disk Drive Master And User Password In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system the following message appears on the screen: “Check system, Then press [F1] key,” press The System Setup screen appears. Press screen. Press the spacebar, then type in your user password and press Enter If you want to change the password, input the new...
Page 219 Using passwords in the Windows® operating system HINT: The hard disk drive shipped with your computer may not support the master password feature. When you attempt to set master password protection, your computer may alert you that this feature is not supported by your drive. If this happens and you want to establish a master password for your hard disk, contact your network administrator for instructions.To register master and user passwords in System Setup, use the following...
Page 220: Changing The Master And User Passwords In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system not match, an error message appears. Repeat steps 6 and 7 to enter the password again. Press When System Setup prompts you to confirm your change, Press Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: Click Start, Shutdown, then click OK.
Page 221 Using passwords in the Windows® operating system When System Setup prompts you to confirm your change, Press Deleting the hard disk drive master and user passwords in the System Setup HINT: You must delete the hard disk drive master password before you can delete the hard disk drive user password.
Page 222: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 223 The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 224: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard.
Page 225 Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text and try typing again.
Page 226: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 227: Using Startup Options To Fix Problems
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 228: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 229: Resolving A Hardware Conflict
You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 230: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 231: Fixing A Problem With Device Manager
If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer.
Page 232 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 233: Memory Problems
The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: The General tab, which provides basic information about the device. The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 234: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 235 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. If Something Goes Wrong...
Page 236: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging batteries” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 237: Display Problems
Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press any key, type the password and press no password is registered, press any key.
Page 238 If Something Goes Wrong Resolving a hardware conflict The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box.
Page 239: Disk Drive Problems
The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 240 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 241 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator. Some programs run correctly but others do not. This is probably a configuration problem.
Page 242: Cd-Rw/Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict CD-RW/DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the CD-RW/DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly.
Page 243: Sound System Problems
Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 244 If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict” on page Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 245 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 246 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the Safely Remove Hardware icon on the System tray.
Page 247: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 248: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. 139.
Page 249: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 250 If Something Goes Wrong Resolving a hardware conflict Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 251 Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). Click Start, then click Run... Enter Cmd and press Enter. Enter PING 192.168.1.1 at the command prompt, and press Enter. If “Request Timed Out”...
Page 252: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 253 “Checking device properties” on page 232 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 254 If Something Goes Wrong DVD operating problems Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties.
Page 255: Develop Good Computing Habits
Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips”...
Page 256: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals.
Page 257 In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point.
Page 258 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 259 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: E-mail files and settings—for Outlook, Outlook Express, or other e-mail apps.
Page 260 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 261 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office utility software such as special toolbars for your web browser).
Page 262: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 263: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 264: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca...
Page 265 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 266: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 267: Password Security
Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 268: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 269: Power Profile Mode
This hot key displays the power profile pop-up window and cycles through the power profile modes. Sample power profile modes The properties of each power profile mode are set in the TOSHIBA Power Saver utility. For more information, see “TOSHIBA Power Saver” on page...
Page 270: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. Sample Standby confirmation box A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box.
Page 271: Hibernation Mode
Hibernation mode This hot key places the computer into Hibernation mode. Sample Hibernation confirmation box Hibernation mode If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 272: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 273: Wireless Device Enable/Disable
Wireless device enable/disable This hot key enables and disables the optional wireless devices installed in your computer. The wireless modes are: Sample wireless mode options window Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Disabling or enabling the Dual Pointing Device”...
Page 274: Zooming Applications In/Out
This hot key turns the cursor control overlay on and off. This hot key turns the numeric overlay on and off. This hot key turns the scroll lock feature on and off. This hot key switches screen or video modes. [Spacebar] “TOSHIBA Zooming 189. “TOSHIBA Zooming Utility” 189.
Page 275: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 276: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 277: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. Double-click the ConfigFree icon Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon click the desired utility.
Page 278 Using ConfigFree™ with your Toshiba Computer Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 279: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 280 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Location of wireless communication switch (identified with a yellow arrow) Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 281 Using ConfigFree™ with your Toshiba Computer If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 282: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 283 Using ConfigFree™ with your Toshiba Computer Sample viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 284 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 285 Using ConfigFree™ with your Toshiba Computer Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 286 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 287: Profile Settings
Using ConfigFree™ with your Toshiba Computer Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 288 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: Internet settings —...
Page 289 Using ConfigFree™ with your Toshiba Computer Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings.
Page 290 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 291: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 292 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. To share a file with one user, drag and drop the file on the user’s icon.
Page 293 Using ConfigFree™ with your Toshiba Computer Sample of sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 294 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 295: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 296 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears.
Page 297 The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: If the Toshiba Wireless Projector utility is closed. If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection).
Page 298: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 299 Using ConfigFree™ with your Toshiba Computer To use the Semi-Automatic Switch feature: Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 300: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 301 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared gigabyte...
Page 302: Terms
Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 303 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 304 Glossary cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 305 controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 306 Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 307 DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 308 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 309 icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device —...
Page 310 Glossary memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM. A computer’s main memory is RAM.
Page 311 online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet. operating system —...
Page 312 Glossary program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date.
Page 313 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 314 Glossary utility — A computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. Web — See World Wide Web. Wi-Fi — A trademarked term by the Wi-Fi Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components.
Page 315: Index
50 not charging 234 power profile hot key 127 power usage mode 269 real-time clock (RTC) 118 removing 128 BIOS Setup see TOSHIBA Hardware Setup button power 66 start 137 creating 113 playing an audio 111 playing using Auto-Run 112...
Page 316 136 Device Manager 231 checking properties 232 disabling a device 232 digital audio .WAV files 148 Digital Subscriber Lines (DSL) 144 disable/enable TOSHIBA Touch and Launch discs handling 110 inserting 109 Disk Defragmenter 240 disk drive corrupted/damaged data files...
Page 317 email 145 environment computer-friendly 41 error messages device driver conflict 229 general hardware problem 229 non-system disk or disk error problem with display settings/ current settings working with hardware program has performed an illegal operation 223 warning resume failure 225 Error-checking 240 Ethernet LAN Port disabling 142...
Page 318 Index volume mute 266 wireless device enable/disable hot key power profile mode 127 hot key utility 178 hot keys 267 Hypertext Transfer Protocol (HT- TP) 144 IBM 101-key enhanced keyboard icon 136 desktop 137 Internet Explorer 137 moving to desktop 136 recycle bin 137 safety 38 Industry Canada requirement 4...
Page 319 microphone external connecting 149 jack 149 using 148 modem determining COM port 139 problem solving 248 resetting port to default settings upgrading 139 monitor adjusting display 83 connecting 80 not working 237 mouse connecting Advanced Replicator 77 connecting USB-compatible 77 moving the computer 93 network accessing 141...
Page 320 232 computer hangs when PC Card inserted 245 computer will not power up 224 contacting Toshiba 262 corrupted/damaged data files Device Manager 231 disabling a device 232 disk drive is slow 240 display is blank 237...
Page 321 138 disk drive taskbar 138 Toshiba Toshiba Assist 162 TOSHIBA Button Controls 191 Toshiba Dual Pointing Device 54 Toshiba Hardware Setup 185 Index TOSHIBA Touch and Launch installing module 160 modules 158 removing module 160 problem solving 243...
Page 322 76 USB-compatible keyboard connecting 76 mouse connecting 77 User password 215 user password, disabling 170 using the Toshiba Dual Pointing De- vice 54 utilities Power Saver 182 volume control 147 warranty limited warranty 40 Web address 145...

This manual is also suitable for:

M5-s433 M5-s4331 M5-s5331 M5-st1412 M5-st8112 Tecra m5-104 ... Show all

Toshiba M5 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: Keeping Your Files Safe

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba M5

Summary of Contents for Toshiba M5