Using Optical Disk Drives - Toshiba TECRA M5 User Manual

Operating Basics
Inserting a module
Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay HDD adaptor, set the Slim Select
Bay lock screw in the hole for the lock position. The lock screw is
inserted in the unlock position at the time of purchasing.
Slim Select Bay HDD adaptor
Using optical disk drives
The full-size drive provides high-performance execution of
CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is
used for CD/DVD-ROM operation. When the computer is accessing a
CD/DVD-ROM, an indicator on the drive glows and the Slim Select Bay
indicator glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
DVD-ROM&CD-R/RW drive
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
When the power of the optical disk drive is off, pressing the Fn + Tab keys
will turn the power of the optical disk drive on. Furthermore, it is possible to
set it to turn the power of the optical disk drive on and eject the tray at the
same time.
4-12
Lock screw
Inserting the Slim Select Bay HDD adaptor
section for precautions on writing to CDs.
section for precautions on writing to CDs/DVDs.
Writing CDs on
Writing CD/DVDs on
User's Manual