Dual Pointing Device - Toshiba Tecra R950 Series User Manual

Dual Pointing device

If you are using a USB mouse, you should also refer to both the
mouse
Touch Pad/AccuPoint
Problem
Either the Touch
Pad or the
AccuPoint does not
work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
The on-screen
pointer moves too
fast or too slow
The reaction of
Touch pad is either
too sensitive or not
sensitive enough.
User's Manual
section and the documentation supplied with your mouse.
Procedure
Check the Device Select settings.
Click Desktop -> Desktop Assist -> Control
Panel -> Hardware and Sound -> Mouse.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1.
2.
3.
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1.
2.
3.
Adjust the touch Sensitivity.
To access it, click Desktop -> Desktop Assist ->
Control Panel -> Hardware and Sound ->
Mouse.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
To access this utility, click Desktop ->
Desktop Assist -> Control Panel ->
Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Buttons tab.
Set the double-click speed as required and
click OK.
To access this utility, click Desktop ->
Desktop Assist -> Control Panel ->
Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Pointer Options tab.
Set the pointer speed as required and click
OK.
USB
6-10