How To Learn More About Intervideo Windvd Creator; Important Information For Use - Toshiba TECRA M5 User Manual

Operating Basics
4. Click the Advanced tab in the System Properties window.
5. Click the Settings icon in the "Performance" section.
6. Click the Advanced tab in the Performance Options window.
7. Click the Change icon in the "virtual memory" section.
8. Select the Custom size button in the Virtual Memory window.
9. Specify much higher values for "Initial size" and "Maximum size."
10. Click the Set button in the Virtual Memory window.
11. Click the OK button in the Virtual Memory window.
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click Start -> All Programs -> InterVideo WinDVD Creator2 ->
InterVideo WinDVD Creator to launch WinDVD Creator.
2. Click Capture button then capture the video data from the
DV-Camcorder via IEEE1394.
3. Click Edit button then drag the video clips from [Video Library] tab to
the edit track.
4. Click Make Movie button in the top bar.
5. Double Click the Right arrow button icon in the center of right side.
6. Put a blank DVD-R/+R disc or an erased DVD-RW/+RW disc in the
drive.
7. Click Start to record to the disc.
8. When recording is finished, the tray opens.

How to learn more about InterVideo WinDVD Creator

Please refer to the on-line Help for additional InterVideo WinDVD Creator
information.

Important information for use

Note the following limitations when you write to a video DVD:
1. Editing digital video
■
■
■
■
■
4-24
Log in with Administrator rights to use WinDVD Creator.
Make sure that your computer is running on AC power when using
WinDVD Creator.
Operate the computer at Full Power. Do not use power-saving
features.
While you are editing a DVD-Video, you can display previews.
However, if another application is running, the preview might not
display properly.
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
User's Manual