Toshiba TECRA M5 User Manual page 229

I/O: Input/output. Refers to acceptance and transfer of data to and from a
I/O devices: Equipment used to communicate with the computer and
IrDA 1.1: An industry standard that enables cableless infrared serial data
J
jumper: A small clip or wire that allows you to change the hardware
K
K: Taken from the Greek word kilo, meaning 1000; often used as equivalent
KB: See kilobyte.
keyboard: An input device containing switches that are activated by
kilobyte (KB): A unit of data storage equal to 1024 bytes. See also byte
L
level 2 cache: See cache.
Light Emitting Diode (LED): A semiconductor device that emits light when
Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of
LSI: Large Scale Integration.
M
main board: See motherboard.
megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also
User's Manual
computer.
transfer data to and from it.
transfer at speeds of up to 4 Mbps.
characteristics by electrically connecting two points of a circuit.
to 1024, or 2 raised to the 10th power. See also byte and kilobyte.
manually pressing marked keys. Each keystroke activates a switch
that transmits a specific code to the computer. For each key, the
transmitted code is, in turn, representative of the (ASCII) character
marked on the key.
and megabyte.
a current is applied.
glass coated with transparent conducting material. The viewing-side
coating is etched into character forming segments with leads that
extend to the edge of the glass. Applying a voltage between the
glass sheets alters the brightness of the liquid crystal.
1) A technology that allows the inclusion of up to 100,000 simple
logic gates on a single chip.
2) An integrated circuit that uses large scale integration.
kilobyte.
Glossary
Glossary-9