Data Verification; Dla For Toshiba; When Using Windvd Creator Platinum - Toshiba TECRA M5 User Manual

Data Verification

To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Click the Options button (
the Options panels.
2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in the
Data Options.
Click the OK button.

DLA for TOSHIBA

Note the following limitations when you use DLA:
■
This software supports only rewritable discs (DVD+RW, DVD-RW, and
CD-RW). It does not support DVD+R/+R DL, DVD-R/-R DL, and CD-R
discs that are not rewritable.
■
DLA does not support formatting and writing to a DVD-RAM disc -
these functions are performed by DVD-RAM Driver Software. Even if
the DLA Format menu appears when inserting a DVD-RAM disc and
right-clicking the drive icon in Windows Explorer, you should use the
"DVDForm" command to format this disc. You can run "DVDForm" by
clicking the Start button on the taskbar to display the Start menu and
then selecting "All Programs", "DVD-RAM", "DVD-RAM Driver" and
"DVDForm" sequentially.
■
Do not use any discs that have been formatted with packet writing
software other than DLA. Similarly, do not use any discs that have been
formatted with DLA with any packet writing software other than DLA.
When using a disc you are not familiar with, format it by selecting "Full
Format" before using it.
■
Do not use the cut-and-paste function for files and folders. A file or
folder that has been cut may be lost if writing fails due to an error on the
disc.
■
When writing any setup files for an application to a disc formatted by
DLA, and attempting to start Setup from this disc, an error may occur.
In this case, please copy the files to your hard disk and then run Setup
from there.

When using WinDVD Creator Platinum

You can record video back to your digital camcorder via i.LINK (IEEE1394)
using WinDVD Creator Platinum. However, there is a case where its
playback sound appears choppy - in this instance please follow the
instructions below:
1. Click start and select the Control Panel.
2. Click the Performance and Maintenance icon in the Control Panel.
3. Click the System icon in the Performance and Maintenance window.
User's Manual
) on the RecordNow! Console to open
Operating Basics
4-23