Device Config; Device Configuration - Toshiba TECRA M5 User Manual

HW Setup

Device Config

Device Configuration

This option lets you set the device configuration.
All Devices
Setup by OS
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set
the Parallel Port Mode. Use the Windows Device Manager to make settings
for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB keyboard/mouse legacy
emulation. If your operating system does not support USB, you can still use
a USB mouse and keyboard by setting the USB KB/Mouse Legacy
Emulation item to Enabled.
Enabled
Disabled
USB-FDD Legacy Emulation
Use this option to enable or disable USB floppy disk drive legacy
emulation. If your operating system does not support USB, you can still use
a USB floppy disk drive by setting the USB-FDD Legacy Emulation item
to Enabled.
Enabled
Disabled
7-8
BIOS sets all devices.
Operating system sets devices that it can control
(Default).
Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set
to ECP (Default).
This setting should be used with some other
parallel devices.
Enables the USB KB/Mouse Legacy Emulation
function (Default).
Disables the USB KB/Mouse Legacy Emulation
function.
Enables the USB floppy disk drive legacy
emulation function (Default).
Disables the USB floppy disk drive legacy
emulation function.
User's Manual