Audio Settings; Dolby/Dts/Mpeg; Sampling Frequency; Dynamic Range Control - GoVideo VR3845 User Manual

Audio Settings

Dolby/DTS/MPEG

Sets the format of the digital audio signal
from the Coaxial and Optical jacks.
1
Press SETUP.
2
Select "AUDIO" > "Dolby Digital" , "DTS" ,
or "MPEG" .
3
Choose from the following options:
PCM – Select if the unit is connected
to a 2-channel digital stereo amplifier.
Bitstream - Select if the unit is con-
nected to a 5.1 channel amplifier/re-
ceiver with a built-in Dolby Digital,
DTS, or MPEG decoder.

Sampling Frequency

Sets the digital output frequency to
match the capabilities of your amplifier.
1
Press SETUP.
2
Select "AUDIO" > "Sampling Freq" .
3
Choose "48KHz" or "96KHz" .
• Only select 96kHz if your amplifier is
capable of handling 96 kHz signals

Dynamic Range Control

Compresses the dynamic range (DRC)
of the audio output—the difference
between the loudest and quietest
passages—during DVD playback.
1
Press SETUP.
2
Select "AUDIO" > "DRC" .
3
Turn DRC on or off.

Surround Mode

Sets the surround mode.
1
Press SETUP.
2
Select "AUDIO" > "Surround" .
3
Choose "Stereo" , "3D (Virtual Sur-
round)" , "Dolby Digital" , or "DTS" to
match the capabilities of your audio
system.
26
DVD Recorder+VCR User's Guide
Dolby Digital
PCM
DTS
Bitstream
MPEG
Sampling Freq.
DRC
Surround
Prev. Select
Dolby Digital
DTS
MPEG
Sampling Freq.
48KHz
DRC
96KHz
Surround
Prev. Select
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
OFF
Surround
ON
Prev. Select
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Surround
Stereo
3D
Dolby Digital
DTS
Prev. Select
Close
Close
Close
Close