Preference / Audio Settings - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지28

PREFERENCE / Audio Settings

Follow the same procedure as Video Settings to select Audio Settings option.
Digital Output
1
Use [.../†] to select 'Digital Output' while Audio submenu
displays.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to select the desired output type.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD Recorder+VCR's digital audio signal will
be output in the PCM 2ch format when you play a DVD (or VHS) recorded with a Dolby Digital (only for DVD) or
MPEG soundtrack. If the DVD is recorded with a DTS sound track then you can hear no sound.
Bitstream
Select when connected to a proper decoder such as Dolby Digital decoder or DTS decoder (or an amplifier or
other equipment with the proper decoder).
Dynamic Range
While watching DVD movies, you may wish to compress the
dynamic range of the audio output (the difference between the
loudest and quietest passages). This allows you to listen to a
movie at a lower volume without losing clarity of sound. Set
'Dynamic Range' to Low or High for this effect.
Follow the same procedure as 'Digital Output' to change the
Dynamic Range.
28
Initial Setup
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
Audio
Digital Output Off
Select Digital
Dynamic Range Off Output
Virtual Surround Off
Off
VCR Reception Stereo
Bitstream
Tape Play Back Hi-Fi
LPCM
Instructions
Enter-Confirm Setup-Exit Move ...†
Audio
Digital Output Off
Dynamic Range Off
Select Dynamic
Virtual Surround Off
Range
VCR Reception Stereo
Off
Tape Play Back Hi-Fi
Low
Instructions
High
Enter-Confirm Setup-Exit Move ...†