Audio Settings; Digital Out; Dts Out - GoVideo VR1940 User Manual

Audio Settings

Digital Out

Sets the format of the digital audio signal
from the rear panel Coaxial jack.
1
Press SETUP.
2
Select Audio > Digital Out.
3
Choose from the following:
PCM – Select if the DVD
Recorder+VCR is connected to a 2-
channel (stereo) digital amplifier.
Bitstream - Select if the DVD
Recorder+VCR is connected to a 5.1
channel amplifier/receiver with a
Dolby Digital decoder.

DTS Out

Enables the DVD Recorder+VCR to
output a DTS (Digital Theater Sound)
signal to an external receiver with a DTS
decoder.
1
Press SETUP.
2
Select Audio > DTS Out.
3
Turn DTS Out on or off.
Surround Sound
Sets your preferred surround sound
format when watching DVD movies.
1
Press SETUP.
2
Select Audio > Surround.
3
Choose from the following:
Stereo – Select if you prefer to hear
the stereo soundtrack on DVD movies
(if available).
• If you are not using the Coaxial digital audio output, you do
not need to set Digital Out, DTS Out, or Surround.
28
DVD Recorder+VCR User's Guide
S S
ETUP ETUP
Digital Out
System
DTS Out
Clock
Surround
Language
TV Audio
Playback
Record
Audio
TV Tuner
Exit
Dolby - Select if you prefer to hear
the Dolby Digital 5.1 soundtrack on
DVD movies (if available).
DTS - Select if you prefer to hear the
DTS 5.1 soundtrack on DVD movies (if
available).
TV Audio
Sets the audio signal you wish to hear
while watching TV.
1
Press SETUP.
2
Select Audio > TV Audio.
3
Choose from the following:
Stereo – Select to hear the broadcast
in stereo.
SAP - Select to hear the Secondary
Audio Program, usually a second
language.
Bitstream
Off
Dolby
Stereo
ENTER
����� ����
���������� ����
SETUP