GoVideo VR1940 Quick Start

VR1940
DVD Recorder+VCR

Quick Start

Welcome to the VR1940 Quick Start Guide—the
fastest way to get started using your DVD
Recorder+VCR. Just follow these easy steps,
from unpacking and setting up to making your
first recording.
If for some reason you need additional help,
please make sure you have followed every step
in this Quick Start and have referred to the
User's Guide before calling customer service.
1
Unpack
DVD RECORDER+VCR VR1940
POWER
DVD•VCR CH – CH +
VCR DVD
VCR DVD
ONE•TOUCH COPY AV 1
IN
INPUT
DV IN VIDEO L - AUDIO - R
DVD Recorder+VCR
Remote Control &
AAA Batteries (2)
Power Cable
Blank DVD+RW
RF Cable
Use this cable in step 2
User's Guide/
Registration Card
Audio/Video Cable
Do you have an
Antenna or
Basic Cable?
Follow the instructions
on this panel.
1 Connect the unit to your TV and antenna/cable as shown.
2 Turn on the DVD Recorder+VCR.
3 Turn on your TV and select the TV's Video or Line input.
4 Follow Initial Setup below.
Antenna/
Cable
DVD Recorder+VCR
Wall
Outlet
Search for Channels
1 Press SETUP.
2 Select TV Tuner > TV Signal, and choose:
• " Antenna" if you are using a standard antenna to
receive channels.
• "Cable" if you are using basic cable to receive
c hannels.
3 Select TV Tuner > Utilities > Start Scan:
• The unit scans for all available channels and stores
them in memory. This may take several minutes. When
scanning is complete, the DVD Recorder+VCR tunes to
the lowest channel found.
If you are using a Cable/Satellite Receiver...
Auto Search will detect the output channel of your receiver. Select channel 2, 3, or 4 on
the DVD Recorder+VCR to view the receiver, and then use your receiver's remote to
select the desired channels.
Note: For advanced connections, please refer to pages 16-19 of the User's Guide
2
Connect
...OR...
Antenna/Cable
Wall Outlet
DVD Recorder+VCR
3
Setup
S S S S
ETUP ETUP ETUP ETUP
TV Signal Cable Start Scan
System
Add/Delete
Uilities -----------
Clock
Swap
Language
Playback
CH:15
Record
Audio
TV Tuner
Exit
Do you have a
Cable Box or
Satellite Receiver?
Follow the instructions
on this panel.
1 Connect the unit to your TV and cable box/satellite receiver as shown.
2 Turn on your TV and select the TV's Video or Line input.
3 Turn on your Cable Box/Satellite Receiver.
4 Turn on the DVD Recorder+VCR and select channel 2, 3 o4 4.
5 Follow Initial Setup below.
Cable Box/
Satellite Receiver
OUTPUT
RF
IN OUT AUDIO VIDEO S-VIDEO
L
R

Set the Clock

The Clock is set automatically when the DVD Recorder+VCR is
powered off. If the date and time are set incorrectly, follow
these steps:
S S S S
ETUP ETUP ETUP ETUP
1 Press SETUP.
System
2 Select Clock > Auto
Clock
Clock and choose
Language
"Off". Playback
Record
3 Select Clock > Date. Audio
TV Tuner
4 Use the / and
/ buttons to set
the month, day, and
year, then press 6 Use the / and / buttons to
set the time, then press ENTER.
ENTER.
7 Press SETUP to exit.
5 Select Clock > Time.
Month/Day/Year
Auto Clock Off
09/17/2004
11/14/2004
Date
Time 11:32:55AM
Time Zone Eastern
Daylight Sav. Auto
Exit