GoVideo VR4940 Read Me First

VR4940
UNPACK YOUR DVD RECORDER+VCR
• VR4940 DVD Recorder+VCR (1)
• Backlit remote control (1)
• 1.5V AAA alkaline batteries (2)
• Audio/video cable (1)
• RF (Antenna) cable (1)
• User manual (1)
• Quick reference guide (1)
• Warranty registration card (1)
• Blank DVD-RW disc (1)
INSERT REMOTE CONTROL BATTERIES
1 Remove battery cover on back of remote control.
2 Insert two 1.5V AAA batteries, paying attention to the
correct polarities (+/–).
3 Replace cover.
CONNECT DVD RECORDER+VCR
1 Connect the RF cable from your antenna or basic cable TV jack to
the RF IN (FROM ANT.) jack on the back panel of the DVD
Recorder+VCR.
2 Connect the supplied audio/video cable from the A/V OUT jacks
on the back panel of the DVD Recorder+VCR to the A/V IN jacks
on your television and/or stereo receiver.
3 Plug the DVD Recorder+VCR into a standard wall outlet and press
the POWER button on the remote control or front panel.
4 Turn on your TV and select the Video input connected to the DVD
Recorder+VCR.
5 The GoVideo splash screen will appear.
• Continue with "Auto Channel Set" below.
• See the User Manual for advanced connections.
RUN "AUTO CHANNEL SET"
Follow these instructions to scan for channels if you are using an antenna or basic cable TV
connection.
1 Press SETUP on the remote control.
• The VR4940 Setup menu appears.
2 Press to select "Tuning Band."
3 Press again to highlight "TV."
4 Use the / buttons to select "TV" or "CATV" and press ENTER:
• Select TV if you are using a standard antenna to receive channels.
• Select CATV if you are using basic cable to receive channels.
5 Use the / buttons to select "Auto Channel Set".
6 Use the / buttons to highlight "Start" and press ENTER:
• Auto Channel Set scans all receivable channels in the selected Tuning Band and stores them in memory. This may take
several minutes.
• When scanning is complete, the DVD Recorder+VCR tunes to the lowest channel found. Press SETUP to exit the Setup
menu.
• If you are using an antenna or basic cable TV connection, the DVD Recorder+VCR clock is set
automatically whenever the unit is turned off. If the clock is set incorrectly, you can set the clock
manually in the Setup menu; see the User Manual for details.
• To select channels on the DVD Recorder+VCR, be sure to use the CH+/– buttons located above and
below the ENTER button, and NOT the CH keys in the TV control section, which are reserved for
MultiBrand TV control. See the User Manual to program the MultiBrand Remote.
Read Me First
Unpacking, Connections & Channel Setup
POWER
EJECT
AV 2 IN COPY CH
L - AUDIO - R S-VIDEO DV IN DVD
VCR
EJECT
POWER
TV/VCR DVD VCR INPUT
COPY
1 2 3
CLEAR
4 5 6
7 8 9 0
TV POWER MUTE
TV
TV INPUT TITLE
CH
VOL
CH+
DISC MENU SETUP
LIST
TRACK+
ENTER
TRACK-
DISPLAY RETURN
CH –
REC MODE TIMER RECORD REC
PAUSE/STEP PLAY STOP
REW FF PREV NEXT
AUDIO SUBTITLE ANGLE ZOOM
ADD CHAP THUMBNAIL REPEAT A-B
MARKER SEARCH CHILD LOCK RANDOM
Antenna/Cable
IN
(FROM ANT.)
RF
OUT
(TO TV)
DIGITAL
AUDIO OUT
DVD RECORDER + VCR VR4940
EJECT
SELECT REC PAUSE STOP REW PLAY
DVD
VCR
Rear of DVD Recorder+VCR
DVD + VCR OUT
AV 1 AV COMPONENT/
PROGRESSIVE
IN OUT
VIDEO OUT
R R Pr
S-VIDEO OUT
L L Pb
VIDEO VIDEO Y COAXIAL
OPTICAL
A/V IN
Television
CH+
CH –
FF
AUDIO
OUT
R
L