Pro-Form 720 Zle Elliptical User Manual page 24

HOW TO USE AN IFIT WORKOUT
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Insert the iFit module into the console.
To use an iFit workout, insert the iFit module into
the console. To purchase an iFit module at any
time, go to www.iFit.com or call the telephone
number on the front cover of this manual. You
must have an iFit module to use an iFit workout.
Note: To use an iFit module, you must have access
to a computer with an internet connection and a
USB port. You will also need an iFit.com mem-
bership. To use a wireless iFit module, you must
also have your own wireless network including an
802.11b/g/n router with SSID broadcast enabled
(hidden networks are not supported).
3. Select a user.
If more than one user is registered, you can switch
users in the iFit main screen. Press the increase
and decrease buttons next to the Enter button to
select a user.
4. Select an iFit workout.
To select an iFit workout, press one of the iFit but-
tons. Before some workouts will download, you
must add them to your schedule on www.iFit.com.
Press the iFit button to download the next workout
in your schedule. Press the My Trainer button,
the My Maps button, the World Tour button, or the
Event Training button to download the next workout
of that type in your schedule. Press the Compete
button to compete in a race that you have previ-
ously scheduled. For more information on the
iFit workouts, please see www.iFit.com.
When you select an iFit workout, the display will
show the duration of the workout and the approxi-
mate number of calories you will burn. The display
may also show the name of the workout. If you
select a competition workout, the display may
count down to the beginning of the race.
5. Start the workout.
See step 3 on page 23.
During some workouts, the voice of a personal
trainer will guide you through your workout. You
can select an audio setting for your personal trainer
(see HOW TO CHANGE CONSOLE SETTINGS on
page 26).
To stop the workout at any time, stop pedaling. The
time will flash in the display. To resume the work-
out, simply resume pedaling.
6. Follow your progress with the display.
See step 4 on page 21.
The My Trail tab will show a map of the trail you are
walking or running or it will show a track and the
number of laps you complete.
During a competition workout, the Competition tab
will show your progress in the race. As you race,
the top line in the matrix will show how much of the
race you have completed. The other lines will show
other competitors. The end of the matrix represents
the end of the race.
7. Measure your heart rate if desired.
See step 5 on page 22.
8. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 22.
For more information on the iFit mode, go to
www.iFit.com.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in the
iFit module must be at least 8 in. (20 cm) from all
persons and must not be near or connected to any
other antenna or transmitter.
24