Table of Contents
Advertisement
2-3. Adjusting Color
●
To select the display mode (color mode)
This function allows easy selection of a desired mode according to monitor application.
Color Mode
Mode
1-Custom
2-AdobeRGB
3-sRGB
4-EBU
5-REC709
6-SMPTE-C
7-DCI
8-CAL1
9-CAL2
10-CAL3
Attention
• Avoid operating any funciton of the monitor while using ColorNavigator.
Note
• CAL mode can be adjusted by using the calibration software "ColorNavigator" and SelfCalibration (see
SelfCalibration" (page
• Available CAL mode differs depending on each input signal (see
Selection"" (page
Procedure
1. Press
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specific mode to be selected. For more information, see
"Mode Preset"" (page
16
Chapter2AdjustingScreens
Availableforthecolorsettingsaccordingtoyourpreference.
SuitableforcolormatchingwithAdobeRGBcompatibleperipherals.
SuitableforcolormatchingwithsRGBcompatibleperipherals.
SuitableforreproducingthecolorgamutandgammaassetforthbyEBU(European
BroadcastingUnion)standards.
SuitableforreproducingthecolorgamutandgammaassetforthbytheITU-RRec.709
standard.
SuitableforreproducingthecolorgamutandgammaassetforthbySMPTE-C
standards.
SuitableforreproducingthecolorgamutandgammaassetforthbyDCIstandards.
Displaysthescreenadjustedbycalibrationsoftware.
29)).
31)).
Themodemenu
appears.
Custom←→Adobe RGB←→sRGB←→EBU←→REC709
CAL3←→CAL2←→CAL1←→DCI←→SMPTE-C
.
or
while the mode menu is displayed.
23).
Purpose
"Setting the mode to execute SelfCalibration "Mode
is pressed.
"3-1. Enabling/Disabling Mode Selection
"Chapter 4
Advertisement
Table of Contents
