Table of Contents
Advertisement
3-9. To Disable Input Signal "Input Skip"
This function allows skipping of the set input signals when the input signals are switched.
When not all the input signals are displayed or when keeping the input signals unchanged, set "Input Skip" to
"On" for the signals to be disabled.
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Input Skip" from "Tools", and press
3. Choose the input signal to set with
4. Select "On" or "Off" with
5. Press
Attention
• You cannot set all the input signals disable. Set at least one input signal to "Off".
• The settings made are applied when the input signals are switched next time.
3-10. Return To Default Setting
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and
All Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
●
To reset the color adjustment value "Color Reset"
This function only resets the color adjustment value for the currently selected mode to the default settings.
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Color Reset" from "Color", and press
3. Choose "Execute" with
4. Press
The color adjustments revert to the default settings.
●
To reset all adjustments to the default settings "All Reset"
This function resets all adjustments to the default settings (except "Clock Adjustment" in the
"SelfCalibration" menu and "Optional Settings" menu).
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "All Reset" from "Tools", and press
3. Select "Execute" with
4. Press
All settings excluding "Clock Adjustment" in the "SelfCalibration" menu and "Optional Settings" menu are reset to
the default settings.
28
Chapter3SettingMonitor
or , and press
or .
to exit.
"Main Default Settings" (page
or .
.
or .
.
.
.
.
46).
.
.
.
.
Advertisement
Table of Contents
