Table of Contents
Advertisement
●
Setting the calibration targets "Target"
Set the calibration targets for SelfCalibration.
Procedure
1. Choose "SelfCalibration" from the Adjustment menu, and press
2. Choose "Settings" from "SelfCalibration", and press
3. Choose "Target" from "Settings", and press
4. Use
or
to select the mode to change, and press
The target setting menu appears.
5. Use
or
to select the items to change, and press
Brightness
WhitePoint
ColorGamut
Gamma
*1
Whenthecolorcoordinatesareset,thetemperaturechangesto"User".
*2
Whenthetemperatureisset,thexandycoordinatesofthewhitepointaresetautomatically.
*3
Thesebecome"Fixed"whencalibratingwithColorNavigator.
6. Use
or
for adjustment.
7. Press
The calibration targets are set.
Attention
• Only set the color gamut calibration when the target color range is precisely known.
• If ColorNavigator was used to calibrate the grey balance, do not change the gamma setting values.
4-2. Executing SelfCalibration "Execute"
Procedure
1. Choose "SelfCalibration" from the Adjustment menu, and press
2. Choose "Execute" from "SelfCalibration", and press
The calibration sensor is activated, and SelfCalibration is executed.
Attention
• To execute SelfCalibration, it is necessary to set the calibration details. For more information, see
Calibration Details "Settings"" (page
• After selecting execute, aging may be executed before the calibration sensor is executed.
32
Chapter4SelfCalibration
Setting Item
White(x)/White(y)
Temperature
ColorGamut
ForeachofRed/Green/
Blue
to exit.
29).
.
.
.
.
Adjustable Range
2
30-200cd/m
Setthebrightnessofthemonitorusing
thebrightnessvalue(cd/m
*1
0.2400-0.4500
SetthemonitorWhitePointusingthe
4000-10000K
colorcoordinateorTemperature.
*2
(100KUnit)
Native
Colorgamutcalibrationisnot
performed.
User
Colorgamutcalibrationisperformed.
0.0000-1.0000
Tocalibratethemonitorcolor
reproductiongamut,setthecolor
coordinatesforred,green,andblue.
1.6-2.7
Setthemonitorgammavalues.
*3
(0.1Unit)
.
.
Setting
2
).
.
"4-1. Setting
Advertisement
Table of Contents
