Table of Contents
Advertisement
Names and Functions of Parts
Front Panel
HEADPHONES
5
6
1
POWER <8> switch
Switches the power on/off. When the power is turned on,
the green lamp lights.
To turn the power off, press and hold the switch for at least
three seconds.
2
INPUT SELECT buttons
Selects the signal input line. The green lamp above the
pressed button indicates the selected input line.
SDI:
Serial digital interface input (3G/HD
compatible)
DisplayPort DUAL:
DisplayPort input (HDCP compatible)
DisplayPort SINGLE: DisplayPort input (HDCP compatible)
HDMI DUAL:
HDMI input (HDCP compatible)
HDMI SINGLE:
HDMI input (HDCP compatible)
• When the power is turned on, the input line becomes the
one selected when the power was last turned off.
• When the FORMAT setting is set to AUTO, both the DUAL
and SINGLE LED indicators are lit when DisplayPort or
HDMI input is detected.
When it is set to 2K/HD/PC, the selection becomes SDI/
DisplayPort SINGLE/HDMI SINGLE.
• When the control lock is on, the
the screen and the input line cannot be changed. (→page
48)
• When INT-SG (internal chart for adjustment [Color Bar +
Grayscale]) is selected, all the lamps above the <INPUT
SELECT> buttons are off. Use the [INPUT SELECT] menu
to select INT-SG. (→page 20)
3
FUNCTION buttons
FUNCTION1 to Function5:
Press a FUNCTION button to execute the function selected
for that button in the menu.
• When the control lock is on, the
on the screen and the FUNCTION operation is disabled.
(→page 48)
12
(Continued)
DisplayPort
HDMI
SDI
DUAL
SINGLE
DUAL
INPUT SELECT
1
2
mark is displayed on
mark is displayed
SINGLE
1
2
3
4
FUNCTION
3
4
MENU button, rotary knob (with PICTURE push-on
switch), and RETURN/VOLUME button (→page 16)
Use these to display menus, select and adjust settings, and
execute items selected in a menu.
MENU:
Displays [TOP MENU] ([MAIN MENU] (main
menu), [FUNCTION] menu, or [INPUT SE-
LECT] menu). Also press this to exit a menu.
Rotary knob: Turn the knob clockwise or counterclockwise
to move the cursor up or down or change a
setting value.
Press the knob to start changing or confirm a
setting value or display a submenu.
RETURN:
Press this button to display the previous
menu or return the setting being set to the
original value.
When no menu is displayed, pressing the rotary knob <PIC-
TURE> or <RETURN/VOLUME> button displays a menu
other than the [TOP MENU].
PICTURE:
When no menu is displayed, pressing the
rotary knob displays the [PICTURE] (picture
adjustment) menu. (→page 17)
VOLUME:
When no menu is displayed, pressing the
<RETURN/VOLUME> button displays the
audio volume bar meter. (→page 17)
5
Speaker (monaural)
This allows you to check the audio.
• Audio is not output while headphones are connected to the
HEADPHONES output connector.
6
HEADPHONES output connector (M3 stereo mini jack)
Headphones can be connected to check the audio.
• The volume and sound quality differ depending on the
headphones.
*
1
For an 4K signal (SDI [QUAD], DisplayPort [DUAL], or HDMI
[DUAL]), you can check the audio of the input signal set in
the 4K INPUT SELECT item of the AUDIO menu for the cor-
responding connector.
<Note>
The brightness of the front LEDs can be changed in the [LED
BRIGHT] setting (→page 33). However, the brightness will always
be in HIGH mode immediately after startup.
5
MENU
RETURN
PICTURE
VOLUME
4
*
1
*
1
Advertisement
Table of Contents
