Panasonic BT-4LH310P Operating Instructions Manual page 39

Main Menu
(Continued)
„ FUNCTION setting restrictions
Under the following conditions, "INVALID FUNCTION" is displayed and the settings cannot be set.
Setting
BLUE ONLY
GAMMA SELECT
WHITE BALANCE
MONO
BLACK MODE
R COLOR
G COLOR
B COLOR
SDI DISPLAY MODE
ZOOM MODE
ZOOM POSITION
PIXEL TO PIXEL
FRAME GRAB
DISPLAY SELECT
MULTI FUNCTION
PICTURE ASSIST
WFM LINE SELECT
LEVEL METER
TIME CODE
CLOSED CAPTION
MARKER
FRAME MARKER
OUTER LINE MARKER
FOCUS-IN-RED
Y MAP
ZEBRA
„ Operation items displayed on the screen during FUNCTION button operation
Pressing any of the <FUNCTION1> to <FUNCTION5> buttons displays the operation assigned to the corresponding button as
shown below.
Setting
BLUE ONLY
[BLUE ONLY OFF] → [BLUE ONLY ON]
GAMMA SELECT
[GAMMA2.20] → [GAMMA2.35] → [GAMMA2.40] → [GAMMA2.60] → [GAMMA FILM] →
[GAMMA. (MANUAL SET)]
WHITE BALANCE [WHITE BALANCE VAR1/2/3]
MONO [MONO OFF] → [MONO ON]
BLACK MODE [BLACK MODE OFF] → [BLACK MODE ON]
R COLOR [R COLOR ON] → [R COLOR OFF]
G COLOR [G COLOR ON] → [G COLOR OFF]
B COLOR [B COLOR ON] → [B COLOR OFF]
Condition or mode when operation not possible
• When Y MAP ON
• When GPI item is set
• When other than VAR1 to VAR3 is selected in COLOR TEMP.
• When GPI item is set • When Y MAP ON
• When NO SIGNAL • When PICTURE ASSIST ON
• When Y MAP ON
• When [BLUE ONLY ON] is selected • When Y MAP ON
• When [BLUE ONLY ON] is selected • When Y MAP ON
• When [BLUE ONLY ON] is selected • When Y MAP ON
• When other than SDI input
• When other than 4K signal input
• When other than 4K signal input
• When GPI item is set
• When other than 1280 × 720p signal input
• When [INT-SG] is selected
• When [INT-SG] is selected
• When [SDI] is selected and SDI DISPLAY MODE is QUAD
• When NO SIGNAL input
• When SDI DISPLAY MODE is SINGLE
• When SDI DISPLAY MODE is QUAD and MULTI FUNCTION is ON
• When other than [SDI] is selected
• When other than [SDI] is selected
• When SDI DISPLAY MODE is SINGLE
• When MULTI FUNCTION is other than ON
• When WFM LINE SELECT is ALL
• When [INT-SG] is selected • When PICTURE ASSIST ON
• When other than [SDI] is selected
• When DisplayPort/HDMI is selected • When 4K/PC signal input
• When SDI DISPLAY MODE is QUAD • When [INT-SG] is selected
• When PICTURE ASSIST ON • PIXEL TO PIXEL
• When MULTI FUNCTION is ON • When PC signal input
• When [SDI] is selected and SDI DISPLAY MODE is QUAD
• Refer to "MARKER" above.
• Refer to "MARKER" above.
• When GPI item is set • When INT-SG is selected
• When BLUE ONLY ON is selected • When Y MAP ON
• When NO SIGNAL input • When MULTI FUNCTION is ON
• When [INT-SG] is selected • When MULTI FUNCTION is ON
• When Y MAP ON • When [INT-SG] is selected
• When GPI item is set
Display
39