Table of Contents
Advertisement
Main Menu
(Continued)
„ PICTURE ASSIST function
The PICTURE ASSIST function displays the same input video on four screens.
Use this function to apply an effect in each screen while checking the video at the top left. This can be very helpful during shooting
with the camera.
The signal selected with
[INPUT] is displayed on a
single screen.
Press the <FUNCTION> button to
which the PICTURE ASSIST function
has been assigned.
<Note>
• Select the screen to which to apply the effect in DISPLAY SELECT. (AREA2 indicates the top right screen, AREA3 indicates the
bottom left screen, and AREA4 indicates the bottom right screen.)
• When the PICTURE ASSIST function is on and the Y MAP function is turned on while one of the [BLUE ONLY], [R COLOR], [G
COLOR], and [B COLOR] functions is on, the [BLUE ONLY], [R COLOR], [G COLOR], and [B COLOR] effects cannot be applied
to the other screens.
• When the PICTURE ASSIST function is turned on, BLACK MODE setting is turned off.
• When the PICTURE ASSIST function is turned on, the MULTI FUNCTION setting is turned off.
• When the PICTURE ASSIST function is turned on in SINGLE screen mode, SDI DISPLAY MODE also becomes QUAD at the
same time. When the PICTURE ASSIST function is turned off later, SDI DISPLAY MODE also becomes SINGLE.
• When the PICTURE ASSIST function is turned on, the audio level meter and time code are not displayed.
• If the power is turned off while the PICTURE ASSIST function is on, the PICTURE ASSIST function will be off and the unit will start
up in the QUAD state when the power is turned on the next time.
„ MULTI FUNCTION function
Use the MULTI FUNCTION function to display FOCUS-IN-RED, WFM, and VSC simultaneously for the original image. (2K and HD
signals only)
Each press of the <FUNCTION1> to <FUNCTION5> (→page 12) button with the MULTI FUNCTION function assigned changes the
display.
MULTI FUNCTION screen
<Note>
• When the MULTI FUNCTION function is turned on, the PICTURE ASSIST setting is turned off.
• When the MULTI FUNCTION function is turned on in SINGLE screen mode, SDI DISPLAY MODE also becomes QUAD at the
same time. When the MULTI FUNCTION function is turned off later, SDI DISPLAY MODE also becomes SINGLE.
• When the MULTI FUNCTION function is turned on, the YMAP setting is turned off.
• When the MULTI FUNCTION function is turned on, the FOCUS-IN-RED setting is also turned on.
Furthermore, when the MULTI FUNCTION function is turned off, the FOCUS-IN-RED setting is also turned off.
• When the MULTI FUNCTION function is turned on, the audio level meter and time code are displayed only in the top left area.
42
Press the same
button again
Normal screen
Video
Video
Video
• List of functions
GAMMA SELECT
FILM GAMMA
COLOR TEMP.
COLOR SPACE
COLOR GAIN
SHARPNESS
MONO
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
Top left screen: Normal screen
Top right screen: WFM screen
Bottom left screen: FOCUS-IN-RED screen
Bottom right screen: VECTOR screen
Advertisement
Table of Contents
