Panasonic BT-4LH310P Operating Instructions Manual page 41

Main Menu
(Continued)
„ FUNCTION skip function
This function allows you to skip some of the setting items of functions assigned to FUNCTION during FUNCTION operation.
When the operations of the functions assigned to <FUNCTION1> to <FUNCTION5> in the FUNCTION menu are performed, a
submenu that allows you to skip the setting items of the functions appears. Set the setting items you want to skip during FUNCTION
operation to [OFF].
A submenu appears for the following functions.
[GAMMA SELECT]/[ZOOM POSITION]/[DISPLAY SELECT]/[CROSS HATCH]/[ZEBRA]
<<Setting example>>
Select [ZEBRA] in the [FUNCTION] menu and press the rotary knob <PICTURE> to open the submenu shown below.
1.
Turn the rotary knob <PICTURE> to select the setting
item you want to skip and press the rotary knob <PIC-
TURE>.
• The setting value can be changed.
ZEBRA SELECT
INT.
EXT.
INT.+EXT
„ SDI DISPLAY MODE function
SDI DISPLAY MODE function allows you to select the display mode for SDI input video.
• When [SINGLE] is set, the selected input video is displayed over the entire screen.
• When [QUAD] is set, the entire screen is split into four areas and the input video of each of SDI1, SDI2, SDI3, and SDI4 is dis-
played in a separate area.
The display positions of SDI1, SDI2, SDI3, and SDI4 are fixed (SDI1 at top left, SDI2 at top right, SDI3 at bottom left, and SDI4 at
bottom right).
<Note>
• When video is displayed while [QUAD] is set, inputs in the same format as the SDI1 input are displayed.
• The audio level meter and time code can be displayed for each input video when [QUAD] is set.
• Normal mode, [PICTURE ASSIST] mode, and [MULTI FUNCTION] mode are available when [QUAD] is set. For each mode, the
display can be changed by turning the function on or off.
• When [QUAD] is set, a 4K signal cannot be displayed.
SINGLE screen
ON
ON
ON
Press the same button again
Press the <FUNCTION> button to which
the SDI DISPLAY MODE function has been
assigned.
2.
Turn the rotary knob <PICTURE> to select [OFF] and
press the rotary knob <PICTURE>.
ZEBRA SELECT
INT.
EXT.
INT.+EXT
3.
Press <RETURN/VOLUME>.
• The submenu closes and the [FUNCTION] menu reappears.
QUAD screen
OFF
ON
ON
41