Table of Contents
Advertisement
Controls and Their Functions
Front panel
POWER switch
Switches the power supply ON/OFF. When the power is ON, the LED (green) lights up.
INPUT SELECT buttons
Selects the signal input line. The green LED light above the button indicates the selected input signal.
VIDEO
:
Video input
Y/C
:
Y/C input
SDI1
:
Serial digital interface input (HD/SD compatible)
SDI2
:
Serial digital interface input (HD/SD compatible)
YP
P
/RGB :
Analog component (YP
B
R
* When using PC Input, select "RGB-COMP." from "YP
DVI-D
:
DVI-D input (HDCP compatible)
* When using PC Input, select "DVI-COMP." from "DVI-D" in the "INPUT SELECT" menu
* The monitor retains the input signal settings selected when the monitor was last switched ON or OFF.
MENU, FUNCTION buttons
Use these buttons to display menus, select and adjust settings and confirm menu selections.
MENU
/FUNCTION1
/FUNCTION2
ENTER/FUNCTION3 : Press to confirm a setting or to open a submenu.
* When the control lock is on, the key mark appears and FUNCTION does not operate.
FUNCTION4
FUNCTION5
Picture adjusting knob
PHASE
CHROMA
BRIGHT
CONT[CONTRAST]
( ) denotes factory preset values.
A rotating knob that can be pushed to operate. You can display and adjust the menu settings by pushing the
knob. The setting values are saved by pushing the knob again.
When values are changed from the factory preset values, the LED above the knob (amber) lights.
The setting values are loaded when the monitor's power is switched ON. The setting values are saved when
the knob is pushed, or when 10 seconds pass after changing the settings. However, operating changes
cannot be made in the following cases.
* When the control lock is on, the key mark appears and setting values cannot be changed (
* When the MONO function is ON (
* When using "RGB-COMP." input, [PHASE] and [CHROMA] operations are disabled.
* While operating HV DELAY (
Volume knob
You can adjust the speaker and headphones volume by rotating the volume knob.
Speaker
Audio input from the AUDIO input terminal or SDI terminal (embedded audio) can be heard.
Connecting headphones to the HEAD PHONE output connector turns off the speakers.
8
P
B
R
menu (
page 22).
(
page 22).
: Press to open a menu, exit a menu or return to a previous menu.
: Moves the cursor downwards and selects items.
It also confirms a menu item assigned to FUNCTION1.
: Moves the cursor upwards and selects items.
It also confirms a menu item assigned to FUNCTION2.
It also confirms a menu item assigned to FUNCTION3.
: Confirms a menu item assigned to FUNCTION4.
: Confirms a menu item assigned to FUNCTION5.
0 – 60 (30)
0 – 60 (30)
0 – 60 (30)
0 – 60 (50) / B.LIGHT [BACKLIGHT] 0 – 60 (50)
page 17), [PHASE] and [CHROMA] operations are disabled.
page 18) (when set to any other setting than OFF), [BRIGHT] operation is disabled.
(continued)
) or RGB input. Also compatible with PC input RGB.
P
/RGB" in the "INPUT SELECT"
B
R
page 23).
Advertisement
Table of Contents
