Panasonic BT-4LH310P Operating Instructions Manual page 29

Main Menu
(Continued)
Submenu
GAIN RED
GREEN
BLUE
BIAS RED
GREEN
BLUE
RESET
COLOR SPACE
LUT
COLOR GAIN RED
GREEN
BLUE
SHARPNESS MODE
*
5
SHARPNESS H
*
5
SHARPNESS V
*
5
MONO
*
1
ZOOM MODE
POSITION
FRAME GRAB
This is grayed out when the same item is set for GPI and [GPI CONTROL] is set to [ENABLE].
*
1
ITU-709 is an ITU-R BT.709 standard.
*
4
This displays the outline correction edge on the outer perimeter of the screen in SINGLE screen or QUAD screen mode.
*
5
Setting
0 to 1023 Adjusts the GAIN elements for RED.
(The factory de-
fault setting values
are the values of
Adjusts the GAIN elements for GREEN.
the [D65] color
temperature.)
• The factory de-
Adjusts the GAIN elements for BLUE.
fault adjustment
values will be set.
-512 to 511 Adjusts the BIAS elements for RED.
(Factory default
Adjusts the BIAS elements for GREEN.
setting: 0)
Adjusts the BIAS elements for BLUE.
Resets the setting values of [GAIN] (RED/GREEN/BLUE) and [BIAS] (RED/
GREEN/BLUE) to the values of the color temperature selected in [COLOR
TEMP].
SMPTE-C Sets the studio standard color shade.
EBU [NATIVE] Displays the color space of the three RGB primary colors unique to BT-
ITU-709
*
4
DCI-P3
NATIVE • Factory default setting
BT-4LH310P: SMPTE-C
BT-4LH310E: EBU
STANDARD Reproduces colors in accordance with the set COLOR SPACE using the 3D LUT
USER1-3 (look up table).
[STANDARD]
[USER1/USER2/USER3] Allows you to select a user setting value. (Factory
• F or details on user downloads, refer to the user customization function (→page
72).
0 to 60 Finely adjusts RED GAIN.
0 to 60 (Factory default setting: 30)
0 to 60 Finely adjusts GREEN GAIN.
0 to 60 (Factory default setting: 30)
0 to 60 Finely adjusts BLUE GAIN.
0 to 60 (Factory default setting: 30)
HIGH Selects the width of the outline correction edge.
LOW [HIGH] Narrow edge
[LOW] Wide edge
0 to 60 Sets horizontal outline correction.
0 to 60 Sets vertical outline correction.
OFF Switches between color and monochrome (MONO).
ON [OFF] Color
[ON]
• When [ON], the [CHROMA] setting is fixed to 0 and the [PHASE] setting is fixed
to 50 in the [PICTURE] (picture adjustment) menu.
OFF Sets the zoom function for 4K signals (4096 x 2160 or 3840 x 2160).
ON [OFF] Normal display
[ON]
CENTER Sets the display position for the zoom function.
LT [CENTER]
RT [LT]
RB [RT]
LB [RB]
[LB]
OFF Sets the function for freezing the screen display when one screen.
ON [OFF] Normal display
[ON]
Description
4LH310P/BT-4LH310E. (This is the maximum color gamut that can be
represented by BT-4LH310P/BT-4LH310E.)
Reproduces colors with the standard 3D LUT.
default setting: STANDARD)
Monochrome
Zooms to 4x.
Center
Top left position
Top right position
Bottom right position
Bottom left position
Still image display
29