Table of Contents
Advertisement
Main Menu
(Continued)
Submenu
ASPECT2 MODE
17:9
(17:9)
16:9
*
2
4:3
13:9
14:9
CNSCO 2.39
CNSCO 2.35
2:1
VISTA
ASPECT2 MODE
16:9
(16:9)
4:3
*
2
13:9
14:9
CNSCO 2.39
CNSCO 2.35
2:1
VISTA
AREA2
OFF
*
4
95%
93%
90%
88%
80%
USER 85%
VAR. H. 85% V. 85%
DOT hhhh xxxx
LINE vvvv yyyy
BACK
NORMAL
*
5
HALF
BLACK
CENTER
OFF
ON
CROSS
OFF
(H. xxxx V. yyyy)
COLOR ITEM
ASPECT1 AREA1
ASPECT2 AREA2
CENTER
CROSS
COLOR
WHITE
BLACK
RED
GREEN
BLUE
An aspect marker is not displayed if ASPECT1 MODE is 17:9 when 17:9 is selected for ASPECT RATIO. (Only the area marker will
*
2
be displayed.)
Displayed when the marker type set in ASPECT1 RATIO/ASPECT2 RATIO is 17:9, 16:9, or 4:3.
*
4
This is enabled only for a marker set in ASPECT1 MODE.
*
5
Setting
Selects/displays the marker type for when ASPECT2 RATIO is 17:9.
• For each item, refer to ASPECT1 MODE(17:9).
Selects/displays the marker type for when ASPECT2 RATIO is 16:9.
• For each item, refer to ASPECT1 MODE(17:9).
Selects/displays the area marker type of the marker set in ASPECT2 RATIO.
• For each item, refer to AREA1.
Selects the background brightness around the marker.
[NORMAL]
[HALF]
[BLACK]
Displays the center marker.
[OFF] Not displayed
[ON]
Displays the cross marker.
[OFF]
[(H. xxxx V. yyyy)]
Display is possible in any horizontal (H: 0020 to 4075) and vertical (V: 0020
to 2139) positions. When a set value [(H. xxxx V. yyyy)] has been confirmed,
press the rotary knob <PICTURE> again to enter each of the horizontal and
vertical positions.
(The factory defaults are H: 0960 and V: 0540.)
Selects the marker color selection type.
[ASPECT1 AREA1]
[ASPECT2 AREA2]
[CENTER]
[CROSS]
Selects the marker color of the item displayed in COLOR ITEM.
[WHITE] white
[BLACK] black
[RED]
[GREEN] green
[BLUE]
Description
Normal background
50 % signal level
0 % signal level (black)
Displayed
Not displayed
Displayed
Aspect 1 and area 1 marker
Aspect 2 and area 2 marker
Center marker
Cross marker
red
blue
(Continued on next page)
25
Advertisement
Table of Contents
