Table of Contents
Advertisement
Deactivating the room monitor
remotely
Preconditions: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ring tone) on the
handset will remain activated until you
press the display key
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
with
(
page 62).
§Save§
Using Bluetooth devices
Your Gigaset SL78H handset can commu-
nicate wirelessly via Bluetooth™ with
other devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set.
You can register 1 Bluetooth headset to
the handset. You can also register up to 5
data devices (PC, PDA) to send and receive
directory entries as vCards or exchange
data with the computer (
To use the phone numbers, dialling codes
(country and area code) must be stored in
¢
the directory (
page 70).
on the handset.
§Off§
¢
page 81).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note
u
You can operate headsets on your
handset that have the headset or
speaker profile. If both profiles are
available, the speaker profile will be
used to communicate.
u
It can take up to 5 seconds to create
a connection between your handset
and a Bluetooth headset. This
applies both when a call is accepted
using the headset or transferred to
the headset, and when a number is
dialled from the headset.
Activating/deactivating Bluetooth
mode
ò
¢
¢
v
Activation
Press
to activate or deactivate Blue-
§Change§
tooth mode (³ = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated
¢
(
page 3):
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note
u
If you register a headset, any head-
set that is already registered will be
overwritten.
u
If you would like to use a headset
with your handset that is already
registered to another device (e.g. to
a mobile phone), please deactivate
this connection before you start the
registration process.
Using Bluetooth devices
63
Advertisement
Table of Contents
