Table of Contents
Advertisement
First steps
If you need to reopen the battery cover to connect the USB data cable or
change the battery:
¤
Remove the belt clip (if
attached).
¤
Place your fingernail into the
notch at the bottom of the
casing and pull the battery
cover upwards.
To change the battery, place
your fingernail in the cavity in
the casing and pull the battery
upwards.
Attaching/removing the belt clip
The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – using your right
thumb apply pressure to the
centre right of the belt clip,
push the fingernail of your left
index finger between the clip
and the casing and lift the clip
upwards.
14
Advertisement
Table of Contents
