Using Bluetooth Devices - Siemens Gigaset SL37H User Manual

First steps

Using Bluetooth devices

Your Gigaset SL37H handset can commu-
nicate wirelessly via Bluetooth™ with
other devices using this technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set.
You can register 1 Bluetooth headset to
the handset. You can also register up to
5 data devices (PC, PDA) to send and
receive directory entries as vCards or to
exchange data with a computer
(page 33).
In order to transfer phone numbers via
Bluetooth connections, it is essential that
area codes (international and local area
codes) are stored on the phone (see
page 28).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note:
– You can only operate headsets on your
handset that have the headset profile.
– It can take up to 5 seconds to create a con-
nection between your handset and a Blue-
tooth headset. This applies both when a call
is accepted using the headset and one is
transferred to the headset, and when a
number is dialled from the headset.
Activating/deactivating Bluetooth
mode
¢ ¢
w í
Data Transfer
¢
Activation
Press to activate or deactivate Blue-
§OK§
‰
tooth mode ( = activated).
In idle status, the ò icon on the handset
shows that Bluetooth mode is activated:
Ð ò V
INT 1
26
¢
Bluetooth
Please note:
– If Bluetooth is activated and accessories
(e.g. data cables page 33) are plugged into
the connection socket (page 1), Bluetooth
is automatically deactivated.
– If a Bluetooth voice connection has
already been established, Bluetooth is
not deactivated until it is ended.
– If a Bluetooth data connection has
already been established, the response
depends on the receiving device.
– Bluetooth is automatically reactivated
when the accessories are removed.
– If Bluetooth is deactivated and accessories
are plugged in, then Bluetooth cannot be
activated.
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be
no more than 10 m.
Please note:
– If you register a headset, any headset that is
already registered will be overwritten.
– If you would like to use a headset with your
handset that is already registered to
another device (e.g. to a mobile phone),
please deactivate this connection before
you start the registration process to the
Gigaset.
¢ ¢
w í
Data Transfer
¢
Search Headset / Search Data Device
The search can take up to 30 seconds.
Once the device has been found, its name
will be shown on the display.
Press the display key.
§Options§
Trust Device Select and press
~
Enter the PIN for the Bluetooth
device you want to register
and press
The device is saved in the list of known
devices.
¢
Bluetooth
.
§OK§
.
§OK§