Using Bluetooth Devices - Siemens Gigaset SL785 User Manual

Using Bluetooth devices

When the room monitor function is acti-
vated, the idle display appears as shown
below:
i à V
INT 1
Á
07:15am
2009
Oct
Room Monitor active
9725551234
OFF Options
Changing the set destination number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and
entering the destination number"
¢
( page 47).
Cancel/deactivate room monitor
Press the End Call key a to cancel the
call when the room monitor is activated.
In the idle status, press the Display key
to deactivate the room monitor
§OFF§
mode.
Deactivating room monitor calls
remotely
Requirements: The phone must support
touch-tone dialing and the room monitor
should be set for an external destination
number.
¤
Accept a call at the handset acting as
the room monitor and press keys 9
;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g., no ringer) on the hand-
set will remain activated until you press
the Display key
§OFF§
48
on the handset.
To reactivate the room monitor function
with the same phone number:
¤
Turn on the activation again and save
¢
with ( page 47).
§Save§
Using Bluetooth devices
Your Gigaset SL78H handset can commu-
nicate wirelessly with other devices using
Bluetooth™ technology.
Before you can use your Bluetooth
devices, you must first activate Bluetooth
and then register the devices to the hand-
set.
You can register one Bluetooth headset to
the handset. You can also register up to 5
data devices (PC, PDA) to send and receive
directory entries as vCards or exchange
data with the computer (
To use the phone numbers, dialing codes
(country and area code) must be stored in
¢
the directory ( page 55).
You will find a description of how to oper-
ate your Bluetooth devices in the user
guides for these devices.
Please note
u
On your handset, you can operate
headsets that have the headset or
handsfree profile. If both profiles
are available, the handsfree profile
will be used to communicate.
u
It can take up to 5 seconds to create
a connection between your handset
and a Bluetooth headset. This
applies both when a call is accepted
using the headset or transferred to
the headset, and when a number is
dialed from the headset.
¢
page 61).