Base Settings; Protecting Against Unauthorised Access; Activating/Deactivating Music On Hold; Repeater Support - Siemens Gigaset SL785 Instructions Manual

Base settings

The base settings are carried out using a
registered Gigaset SL78H handset.
Protecting against unauthorised
access
Protect the system settings of the base
with a PIN known only to you. The system
PIN must be entered when, for example,
registering/deregistering a handset to/
from the base or when restoring the
default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base (default setting: 0000) to a 4-
digit PIN known only by you.
Gigaset SL785: Setting a system PIN facili-
tates remote operation of the answering
¢
machine page 53.
Ï
¢ ¢
v
System
~
Enter the current system PIN
and press
~
Enter your new system PIN
and press
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base to the original code
0000:
Disconnect the power cord from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Release the key after a
while.
The base has now been reset and the sys-
tem PIN 0000 set.
Please note
All handsets are deregistered and must
be re-registered. All settings are
restored to the factory settings.
¢
System PIN
.
§OK§
.
§OK§
Activating/deactivating music
on hold
Ï
¢ ¢
v
Audio Settings
¢
Music on hold
Press to activate or deactivate the
§Change§
music on hold (³ = on).

Repeater support

With a repeater you can increase the range
and reception strength of your base. You
will need to activate repeater mode. This
will terminate any calls that are in progress
at the time.
Precondition: A repeater is registered.
Eco mode is deactivated.
Ï
¢ ¢
v
System
Press to deactivate repeater mode
§Change§
(³= on).
Please note
Repeater support and eco mode
¢
( page 55) cancel each other out,
i.e. both functions cannot be used at
the same time.
Restoring the base to the factory
settings
When the settings are restored
u
date and time will be retained
u
handsets are still registered
u
the system PIN is not reset
Ï
¢ ¢
v
Reset
~
Enter the system PIN and
press
§OK§
Press the display key.
§Yes§
Base settings
¢
Repeater Mode
¢
Base Reset
.
71