Chromatherapy Led Lighting - Aquatic Serenity Series Owner's Manual & Installation Manual

iNSTALLATiON iNSTruCTiONS

ChrOmAThErAPy LEd LighTiNg:

All serenity models* come equipped with a digital color-changing underwater light for soothing chromatherapy. to
complement your bathing experience, the Aquatic electronic control panel allows you to select a color according to
the desired effects.
To Turn your Chromatherapy Lighting System ON: Press the light button
on in color wash mode. A second press of the button will turn the lighting system off. subsequent presses will move
the lighting system through the seven constant color modes.
• 1st Press
Color wash: random color blend
• 2nd Press
Off
• 3rd Press
white: clarity
• 4th Press
Off
•
5th Press
Aqua: calm
•
6th Press
Off
• 7th Press
Violet: inspiration
• 8th Press
Off
To replace Bulb:
1. disconnect the power to your bathtub.
2. drain the bathtub.
3. Open the lens of the fixture using OnLY the proper tool provided for that purpose (see diagram 7A). do not attempt
to remove the lens without the provided tool.
4. replace your Led light (replacement Led lights can be obtained from Aquatic industries).
5. Verify "O" ring is not damaged and is properly positioned in the groove when replacing the lens. if there is damage
or lens does not seal properly, do not refill bathtub.
trOuBLesHOOting guide for underwAter MOOd LigHt:
NOTE: do not twist LEd light into socket. use gentle pressure and push LEd light into place.
*does not apply to freestanding models.
12
7A
once to turn the chromatherapy Light
• 9th Press
Blue: Peace
• 10th Press
Off
•
11th Press
yellow: Hope
• 12th Press
Off
• 13th Press
green: Harmony
• 14th Press
Off
• 15th Press
red: courage
Bath Surface
AquAtic industries, inc.