Aquatic AI3AIR7236 Specification Sheet

SErENITy 3
SErENITy Air Baths
Deck Width 2"
SPECIFICATIONS:

GeneRal SPecIfIcatIonS:

Tub Size 71 1/4" x 36" x 23 1/4"
181 cm x 91 cm x 59 cm
Bathing Well 48 1/2" long
24" wide
21 3/4" interior depth
Shipping Weight 245 lbs. / 111 kg
Tub Weight Filled 868 lbs. / 394 kg
Tub Only Weight 126 lbs. / 57 kg
Gallons to Overflow 90 gal. / 341 L

electRIcal SPecIfIcatIonS:

Blower/Heater 1 HP; 10.5 AMP; 120V
Requirement 15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
This unit is not recommended for shower installations.
fax-on-demand
document # 1140
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem-
perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
72
# AI3AIR7236 / AI3AIR7236To (Tub only)
Model
36"
71 1/4"
23 1/4"
21 3/4"
StandaRd equIPMent:
air Bath System:
- 84 Air Jets
- 1 HP Variable Speed Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Daily Purge and Dry Cycle with Water Sensors
aquatic quality features:
- Chromatherapy
- Raised Seat for Air Jet Action on Thighs
- Slip Resistant Floor
- Air Channels Lined with Antimicrobial Coating
- 2 Arm Rests
- Extra Deep and Long Bathing Well
- Pre-leveled ABS Support Base
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
ul & IaPMo listed, factory tested
limited lifetime Warranty
36"
20"
note: Serenity tub only models feature a
Pre-leveled aBS Support Base.

oPtIonal equIPMent:

Comfort Pillow - Oval or Rectangle
•
Bolt-On Grab Bar
•
- White, Biscuit, Chrome, Polished Brass, Gold,
Polished Nickel, Satin Nickel or Oil Rubbed Bronze
Lift & Turn Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel or Oil Rubbed Bronze
Cable Drive Waste and Overflow
•
- Chrome, Polished Brass, Gold, Polished Nickel,
Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit Only)
Waterproof Remote Control with infrared sensor
•
and 25' cord
Factory Installed Rigid ABS Tile Flange
•
Remote Blower Wiring Kit
•
Color Matched Acrylic Skirt
•
Premium Colors
•
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
Rough-In Plumbing
Measurements
10 1/2"
1 1/2"
www.aquaticwhirlpools.com 800.555.5324
March 2008