Table of Contents
Advertisement
D For both BIIS 1200 and dPMR operations
The following key functions are useful for BIIS 1200 and dPMR
operations.
STATUS UP, STATUS DOWN "STUP" "STDN"
➥ Push to select a status message.
➥ When the automatic scroll function is activated, push to
cancel it, if desired.
➥ When an SDM that includes more than 12 characters is
displayed, push to manually scroll the message.
STATUS "STAT"
➥ Push to enter the status message selection mode.
• Push [CH Up] or [CH Down] to select a desired message.
➥ Hold down for 1 second to transmit the last selected status
message.
MESSAGE "MSG"
➥ Push to enter the SDM selection mode.
• Push [CH Up] or [CH Down] to select a desired SDM.
➥ While in the SDM selection mode, hold down for 1 second
to transmit the last selected SDM.
➥ While in the stand-by mode, hold down for 1 second to
enter the message editing mode. (dPMR only)
• Set a desired message using the 10-keypad. (Only 10-key version)
(p.22)
In BIIS 1200 operation, status messages and SDM are
selectable in the same mode.
D Additional key functions
• For both BIIS 1200 and dPMR operations
The following key functions are recommended for BIIS 1200
and dPMR operations, and function as described below.
CALL "CALL"
➥ On an MSK channel, push to transmit a BIIS call.
➥ On a digital channel, push to transmit a dPMR call.
Depending on the pre-programmed settings, pushing [PTT]
makes a call in the same way as using [Call]. Moreover,
when you keep holding down [PTT] after receiving an
acknowledgement, you can start a conversation without
pushing it again.
TX CODE ENTER "TXCE"
Push to enter the ID code edit mode, and then set a desired
ID code. (pp. 7, 18)
• For only BIIS 1200 operation
The following key function is required for BIIS 1200 operation,
and functions as described below.
MONITOR (AUDIBLE) "MON"
After communication is finished, push this key to send a 'Clear
down' signal to terminate the connection.
Depending on the pre-programmed settings, the Priority
A channel is automatically selected after a 'Clear down'
signal terminates a connection.
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
Advertisement
Table of Contents
