Icom IC-F4160DS Operating Manual page 9

D Displaying a received call record
— Queue channel mode
The transceiver memorizes up to three calling station's IDs.
When the fourth call is received, the oldest call record will be
removed, and the last received call will be added. When the
transceiver is turned OFF, all the records are deleted.
q Hold down [BIIS Button] for 1 second to enter the queue
channel mode.
• The screen display varies as shown below.
When the transceiver
has a call record
< >
QUEUE
–QUEUE!–
BIIS CALL TXCE MON
w Push [CH Up] or [CH Down] to display a desired record.
e Hold down [BIIS Button] for 1 second again to return to
the stand-by mode.
• When no operation occurs for 30 seconds, the transceiver auto-
matically returns to the stand-by mode.
NOTE: You can call back from the queue channel record.
While displaying an ID, push [Call] to make a call using
the selected ID.
When the transceiver
has no call record
< >
QUEUE
NO QUEUE
BIIS CALL TXCE MON
BIIS 1200 OPERATION
D Displaying a received message
The transceiver memorizes up to six received messages.
When the seventh message is received, the oldest mes-
sage will be removed, and the last received message will be
added. When the transceiver is turned OFF, all the messages
are deleted.
q Hold down [BIIS Button] for 1 second to enter the queue
channel mode.
w Push [BIIS Button] momentary to enter the received mes-
sage mode.
• The screen display varies as shown below.
When the transceiver
has a message record
MESSAGE
− MSG! −
BIIS CALL TXCE MON
e Push [CH Up] or [CH Down] to display a desired mes-
sage.
r Hold down [BIIS Button] for 1 second again to return to
the stand-by mode.
• When no operation occurs for 30 seconds, the transceiver auto-
matically returns to the stand-by mode.
2
When the transceiver
has no message record
MESSAGE
− NO MSG −
BIIS CALL TXCE MON
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
6