Table of Contents
Advertisement
3
dPMR OPERATION
■ Transmitting a command (continued)
D Transmitting a Kill Call
A Kill call allows you to send a command that will disable the
target station.
q Push [dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STATUS" is displayed.
r Push [CH Up] or [CH Down] to select "KILL."
t Push [Call] to transmit a Kill call to the selected station.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received.
• "FAILED" is displayed when no acknowledgment is received.
y After a specified time period, the transceiver will return to
the stand-by mode.
25
D Transmitting a Revive Call
A Revive call allows you to send a command that will revive
the (stunned) station.
q Push [dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w Push [CH Up] or [CH Down] to select a desired Individual
ID.
e Push [dPMR Button] again to enter the application selec-
tion mode.
• "STATUS" is displayed.
r Push [CH Up] or [CH Down] to select "REVIVE."
t Push [Call] to transmit a Revive call to the selected sta-
tion.
• "WAIT" is displayed while transmitting.
• "OK" is displayed when an acknowledgement is received.
• "FAILED" is displayed when no acknowledgment is received.
y After a specified time period, the transceiver will return to
the stand-by mode.
Advertisement
Table of Contents
