Quick Set-Up - Universal Remote Control URC-A6 Owner's Manual

Congratulations!
With your new URC-A6 universal remote,
you now have the power to control your
home entertainment system with just one
easy-to-use control. Thousands of audio and
video component codes have already been
programmed into the remote for you, making
it a breeze to set up. Be sure to install the
included batteries first. See page 5 for
instructions.

Quick Set-up

Note: Selecting the proper Component
button is a key to your success. If you have
a combination component that includes a
DVD or Blu-Ray player, use the DVD button
regardless of other functions, so that the DVD
transport controls will work properly. Select
SAT/CABLE for your cable box so the Menu,
Guide, Info and Exit buttons work correctly.
Set-up one component at a time, and you'll
move quickly through your system.
STEP 1: Turn on the component you want to
activate. (Other components can be on or
off, it doesn't matter.)
STEP 2: Point your new URC-A6 universal
remote toward the component and press the
appropriately labeled Component button (TV
for TV, DVD for DVD, etc.) While holding
this button down, press the numeric keys one
at a time sequentially (1, 2, 3, etc.) until the
component turns off.
STEP 3: Release the Component button to
save the code. The component light will
blink three times to confirm that the code has
been stored.
Check your work before you move to the
next component. Press the POWER [ON]
button to turn the component back on.
Next, test the VOLUME and CHANNEL
buttons (or PLAY and STOP buttons for VCR
and DVD). Repeat Steps 1-3 to activate up
to six components.
Didn't work for one of your components?
See other set-up options starting on page 7.
Page | 1