Osd (On-Screen Display) Control Punch Through - Universal Remote Control URC-A6 Owner's Manual

Hide thumbs Also See for URC-A6:
Table of Contents

Advertisement

OSD (On-Screen Display) Control
Punch Through
This "punch through" enables you to
program the URC-A6 so that CBL or DVD
OSD Controls (MENU, GUIDE, INFO, EXIT,
SEL and 4 Cursor Controls) will also operate
in other component modes on the remote
control.
STEP 1: Press and hold the component
button you want to add OSD Control to,
such as [TV] or [VCR], and the SELECT [SEL]
button at the same time for two seconds until
the Component LED light turns on.
STEP 2: Press the [MENU] button. The
component LED will blink once.
Note: If you do not press a button within 30
seconds, the component light will turn off.
The remote will exit the programming mode,
and you will have to start over with step
one.
STEP 3: Press either the [CABLE/SAT] or
[DVD] button that you want to use as the
source of OSD Control. The component LED
will blink three times to confirm it is saved.
Replace
with
high
quality
image
On Screen Display (OSD)
Page | 26

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents