Tone - Denon AVR-3808 Owner's Manual

Effect Level
Adjust effect signal level.
1 ~ ~ 15
[Variable range] 10
Set to a lower level if the positioning and sense of phase of the
surround signals seems unnatural.
Room Size
Determine size of acoustic environment.
Small Medium small Medium
[Selectable items]
Medium large Large
NOTE
"Room Size" does not indicate the size of the room in which sources
are played.
AFDM
Auto-select surround mode by source.
This function only works for software containing a special identification
signal.
If the software being played is recorded in Dolby Digital EX or DTS-ES,
it is played in 6.1-channels. If not, it is played in 5.1-channels.
[Selectable items] ON OFF
Example : Playing Dolby Digital software (with EX flag)
• When "AFDM" is set to "ON" , the surround mode is automatically
set to the DOLBY D + PLgx C mode.
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
"SB CH Out" to "MTRX ON" .
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON" , set "SB CH Out" to "MTRX ON" or "PLgx CINEMA" .
SB CH Out )
(for Multi-channel sources
Select playback mode for surround back channels.
[Selectable items]
z1
NON MTRX MTRX ON PL II x CINEMA
z3 z4
ES MTRX ES DSCRT DSCRT ON OFF
z1: This can be selected when "Surround Back" is set to "2spkrs"
at the GUI menu "Manual Setup" – "Speaker Setup" – "Speaker
Configuration" setting (vpage 28).
z2: This can be selected when "Surround Back" is set to "2spkrs"
or "1spkr" at the GUI menu "Manual Setup" – "Speaker Setup"
–"Speaker Configuration" setting.
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.
SB CH Out
(for 2-channel sources)
Determine whether to use surround back speakers.
ON OFF
[Selectable items]
Subwoofer Att.
Attenuate subwoofer level when using EXT. IN mode.
ON OFF
[Selectable items]
Set this to "ON" if the subwoofer channel level seems too high when
playing Super Audio CD.
Subwoofer
Turn subwoofer output on and off.
ON OFF
[Selectable items]
Default
Resets the settings to the default values.
s Tone
Adjust the tonal quality of the sound.
Tone Defeat
z2
PL II x MUSIC
Turn tone adjustments off.
[Selectable items]
The tone cannot be adjusted when in the DIRECT mode.
Bass
Adjust low frequency range (bass).
[Variable range]
Treble
Adjust high frequency range (treble).
[Variable range]
"Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF" .
ENGLISH
ON OFF
–6dB ~ +6dB
–6dB ~ +6dB