Quick Select Name; Trigger Out 1; Trigger Out 2; Remote - Denon AVR-3808 Owner's Manual

Text
Text information display.
[Selectable items] ON OFF
Master Volume
Master volume display during adjustment.
ON OFF
[Selectable items]
NET/USB / iPod / Tuner
This sets the time the on-screen display is displayed when an operation
is performed.
[Selectable items] Always 30s
g Quick Select Name
Change the Quick Select name.
Up to 16 characters can be input.
[Input characters]
A ~ Z a ~ z 0 ~ 9
! " # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] (space)
h Trigger Out 1
Select the conditions to turn on the trigger out 1 with
respect to the zone, input source, surround mode, HDMI
monitor, etc.
For details about the trigger out function, see page 21.
j Trigger Out 2
This sets the conditions to turn on the trigger out 2, in the
same way as "Trigger Out 1" above.
[Selectable items]
Setting with Respect to the Zone
10s OFF
• When the power of the zone turned on/off, the trigger out turns on.
• Associated with the power supply of zones set to "ON" .
Setting with Respect to the Input Source
• When the input source set to on is selected, the trigger out turns
on.
• Associated with respect to the input source for zones set to "ON" at
"Setting with Respect to the Zone" .
Setting with Respect to the Surround Mode
• When the surround mode set to on is selected, the trigger out turns
on.
• Associated with respect to surround modes that are set to "ON" .
• This can be set if the "MAIN ZONE" setting at "Setting with Respect
to the Zone" is set to "ON" .
• Associated when an input source for which "Setting with Respect to
the Input Source" is set to "ON" is selected.
Setting with Respect to the Monitor
• When the HDMI monitor set to on is selected, the trigger out turns
on.
• Associated with respect to HDMI monitor that are set to "ON" .
• This can be set if the "MAIN ZONE" setting at "Setting with Respect
to the Zone" is set to "ON" .
• Associated when an input source for which "Setting with Respect to
the Input Source" is set to "ON" is selected.
ON – – –
k Remote ID
Set remote control ID.
Match the ID setting of the remote control unit and the
receiver.
[Selectable items] 1 2 3 4
• When changing the remote ID, also change the AMP , iPod, TU and
NET/DTU modes of the main remote control unit at the same time
(vpage 63).
• When changing the remote ID, also change the sub remote control
unit at the same time (vpage 68).
l 2Way Remote
Make setting for 2-way remote control unit.
[Selectable items] Used Not Used
When using a 2-way remote control unit (RC-7000CI and RC-7001RCI,
sold separately), set this to "Used" .
A0 Dimmer
Adjust display brightness of the receiver.
[Selectable items] Bright Dim Dark OFF
Operating from the main unit
Press the DIMMER button.
Bright Dim
OFF Dark
ENGLISH