Specifications - Denon AVR-3808 Owner's Manual

ENGLISH

Specifications

n
Audio section
• Power amplifier
Rated output:
Dynamic power:
Output connectors:
• Analog
Input sensitivity / Input impedance:
Frequency response:
S/N:
Distortion:
Rated output:
• Digital
D/A output:
Digital input:
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
RIAA deviation:
S/N:
Rated output:
Distortion factor:

Front:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround (A + B):
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
160 W + 160 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
140 W x 2ch (8 Ω/ohms)
210 W x 2ch (4 Ω/ohms)
Front, Center, Surround back 6 ~ 16 Ω/ohms
Surround: A or B 6 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
200 mV / 47 kΩ/kohms
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
102 dB (DIRECT mode)
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
1.2 V
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Format — Digital audio interface
2.5 mV
±1 dB (20 Hz to 20 kHz)
74 dB (A weighting, with 5 mV input)
150 mV
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• S-Video connectors
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.3 (PAL) / 0.286 (NTSC) Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to "OFF")
• Color component video connector
Input / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P / C
B
P / C
R
Frequency response: 5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to "OFF")
n
Tuner section
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
Receiving Range: 87 .5 MHz ~ 108.0 MHz
1.0 µV (11.2 dBf)
Usable Sensitivity:
50 dB Quieting Sensitivity: MONO
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO
STEREO 72 dB
Total harmonic Distortion (at 1 kHz): MONO
STEREO 0.3 %
n
General
Power supply: AC 230 V, 50 Hz
550 W
Power consumption:
0.3 W (Standby)
Maximum external dimensions: 434 (W) x 171 (H) x 420 (D) mm
Mass: 17 .8 kg
n
Main remote control unit (RC-1068)
Batteries: LR6/AA Type (two batteries)
Maximum external dimensions: 63 (W) x 238 (H) x 31 (D) mm
Mass: 190 g (including batteries)
n
Sub remote control unit (RC-1070)
Batteries: R03/AAA Type (two batteries)
Maximum external dimensions: 49 (W) x 220 (H) x 24.5 (D) mm
114 g (including batteries)
Mass:
b For purposes of improvement, specifications and design are subject to change without notice.
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
[FM] [AM]
W)
-15
522 kHz ~ 1611 kHz
18 µV
1.6 µV (15.3 dBf)
77 dB
0.15 %