Pty Search; Tp Search - Denon AVR-3808 Owner's Manual

ENGLISH
<SOURCE SELECT>
<ON/STANDBY>
uiop
[ TU]
( mode)
uiop
[SEARCH]
[CHANNEL]
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
0
PTY Search
Use this function to find RDS stations broadcasting a
designated program type (PTY).
For a description of each program type, refer to "Program
Type (PTY)" .
1
<SOURCE SELECT>
Either turn
(AMP mode) to select "TUNER".
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
(vpage 60 "Remote Control Unit Operations")
3
[SEARCH]
Press to select "PTY".
4
Watching the display, press
[ AMP]
program type.
5
[CHANNEL]
Press .
PTY search begins automatically.
b If there is no station broadcasting the designated program type
with the above operation, all the reception bands are searched.
b The station name is displayed on the display after searching
stops.
[POWER
6
OFF]
To continue searching, repeat steps 2 to 4.
b If no station broadcasting the designated program type is found
when all the frequencies have been searched, "NO PROGRAMME"
is displayed.
[iPod]
[TUNER]
TP Search
Use this function to find RDS stations broadcasting traffic
programs (TP stations).
1
Either turn
(AMP mode) to select "TUNER".
[TUNER]
or press
2
To operate using the main remote control unit, set the
remote control unit to the TUNER (
(vpage 60 "Remote Control Unit Operations")
) mode.
3
Press
4
Press
TP search begins automatically.
ui to call out the desired
b If no TP station is found with the above operation, all the reception
bands are searched.
b The station name is displayed on the display after searching
stops.
5
To continue searching, repeat steps 2 to 3.
b If no other TP station is found when all the frequencies have been
searched, "NO PROGRAMME" is displayed.
<SOURCE SELECT>
or press
) mode.
[SEARCH]
to select "TP".
[CHANNEL]
.
[TUNER]