Battery - VTech CS5111-2 User Manual

Hide thumbs Also See for CS5111-2:
Table of Contents

Advertisement

Battery

After the battery is fully charged for 16 hours, you can expect the following performance:
Operation
While in use (talking)
While not in use (standby*)
*Handset is off the telephone base but not in use.
The battery needs charging when:
A new battery is installed in the handset.
The handset beeps.
LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.
CAUTION:
To reduce the risk of fire or injury to persons, read and follow these instructions:
Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or
skin. The electrolyte may be toxic if swallowed.
Exercise care in handling batteries in order not to create a short circuit with conductive materials such as rings, bracelets,
and keys. The battery and/or conductor may overheat and cause burns.
Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and
limitations specified in this manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE
Operating time
Five hours
Six days
www.vtechphones.com
.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs5111-3

Table of Contents