Speed Dial; Store A Speed Dial Entry - VTech CS5111-2 User Manual

Telephone operation

Speed dial

Your telephone can store up to nine telephone numbers with names (up to 14
characters and 24 digits in each location) in the speed dial memory locations
you assign in the handset.

Store a speed dial entry

Press PROG when the handset is not in use and then press
1.
screen displays SPEED DIAL.
2. Press SELECT. The screen displays ENTER 1-9.
3. Press a key (1 through 9) to assign the speed dial location where this number
will be stored. The screen displays ENTER NAME.
Use the dial pad keys to enter the name (see the Character chart on page
4.
17) and then press SELECT or PROG .
• Press to move the cursor to the left or
Press CHAN/REMOVE to erase a character.
•
The screen displays ENTER NUMBER.
5.
6. Use the dial pad keys to enter the telephone number, and then press SELECT
or PROG.
• Press to move the cursor to the left or
• Press CHAN/REMOVE to erase a digit.
Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).
•
Press SELECT or PROG to confirm. You will hear a confirmation tone.
7.
to the right.
to the right.
www.vtechphones.com
• The entries stored
in the speed
dial memory will
be numbered
01 through 09
and share the
or until the
memory in the
directory.
• Press OFF at any
time to exit speed
dial mode.
• If the location is
not empty, the
new entry will
replace the old
entry and the
old entry will
be moved to a
directory location.
21