Call Waiting; Temporary Tone Dialing - VTech CS5111-2 User Manual

Telephone operation

Call waiting

If you subscribe to call waiting service and you are on a call when a new call
comes in, you will hear a beep. The caller ID information will be displayed if you
subscribe to combined caller ID with call waiting service from your telephone
service provider.
• Press /FLASH on the handset to put the current call on hold and answer
the incoming call.
• Press /FLASH at anytime to alternate between calls.

Temporary tone dialing

If you have pulse (rotary) service, you can change from pulse to touch tone dialing
during a call by pressing TONE
signals to access telephone banking or long distance services.
Once you have initiated your call by dialing the phone number in pulse (rotary), press
TONE . Now, all subsequent key presses will be sent as touch tone signals.
*
After you hang up, the phone will return to pulse (rotary) dialing for the next call.
. This is useful if you need to send touch tone
*
www.vtechphones.com 13