Table of Contents
Advertisement
I Programming a frequency
D D Receive frequency
q Select the desired channel to be programmed.
• Channel 1 to 160 (maximum) are programmable.
w Push [RX
] to select the frequency selection
CLAR
mode.
Ç
"Ç" indicator appears.
e Enter 4 to 6 digits of the desired frequency via the
keypad.
• Or rotate [GRP] and [CH] to change the frequency.
• Pushing [Y]/[Z] on the microphone also tunes the fre-
quency.
D D Transmit frequency
q Select the desired channel to be programmed.
w Push [TX
].
TXF
"
" indicator blinks.
e Enter the desired 5 or 6 digit frequency via the key-
pad.
• [GRP] and [CH], as well as [Y]/[Z] on the microphone
cannot be used.
FREQUENCY PROGRAMMING
r Push [MODE
] several times to select the de-
SET
sired operating mode (type of emission).
Ç
t Push [ENT] for 1 sec. to program the user chan-
nel.
• 3 beeps sound and "≈" disappears.
"Ç" indicator disappears when programming is completed.
r Push and hold [ENT] for 1 sec. to program the user
channel.
• 3 beeps sound.
"
" indicator disappears.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
15
Advertisement
Table of Contents
