Clock Functions - Electrolux EI24EW45LS User Manual

10 www.electrolux.com
Button
5.6 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display

6. CLOCK FUNCTIONS

SYM-
BOL
Press
change the clock function.
Press
of the clock functions, or wait 5
seconds for the setting to be con-
firmed automatically.
6.1 Setting the DURATION or
END
1.
Press
display shows
Function
MINUTE MINDER
TEMPERATURE
come on one by one.
FUNCTION
MINUTE MINDER To set a countdown time. This function has no ef-
TIME OF DAY
DURATION
END
again and again to
to confirm the settings
again and again until the
or .
Description
To set the minute minder. Hold the
button for more than 3 seconds to
activate or deactivate the light in the
oven cavity.
To check the temperature inside the
oven cavity and to check the Core
Temperature Sensor temperature
when it is connected (if applicable).
Use only when an oven function is
set.
The bars show that the oven temperature
increases or decreases.
DESCRIPTION
fect on the operation of the oven. You can set the
MINUTE MINDER at any time, also when the appli-
ance is off.
To set, change or check the time of day. Refer to
"Setting the time".
To set how long the appliance must operate. First
set an oven function before you set this function.
To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
2.
Press
3.
Press
4.
Press
5.
Press
nal sounds for 2 minutes after the
time ends.
time setting flash in the display. The
oven stops.
6. Press any button or open the oven
door to stop the acoustic signal.
or flashes in the display.
or to the set minutes.
to confirm.
or to set the hour.
to confirm. An acoustic sig-
or symbol and