Roland EGX-30A User Manual page 31


2. Rotate in the direction
of the arrow.
Use the spanner to tighten and secure in place.



Provisionally tighten the character
cutter in the engraving-tool holder,
Engraving-tool
and install the engraving-tool holder
holder
on the tool carriage.
Hexagonal
screw driver
1. Turn in the
direction of the
arrow to tighten
provisionally.
Press the SET SURFACE key to lower
the tool, then loosen the screw for the
engraving-tool holder.
Hexagonal
screw driver
Gently lower the cutter until the tip of
the cutter touches the surface of the
Material surface
material.
Tighten the screw securely to secure
the cutter in place.
Hexagonal
screw driver
Chapter 3 Getting Ready for and Performing Cutting
3-3 Installing a Tool
29