Part Names And Functions; Front; Rear - Roland EGX-30A User Manual

1-2 Part Names and Functions

Front

Vacuum-adapter hose port
This is where the dust col-
lector is attached to take up
cuttings while engraving is
in progress.
Table
The workpiece to be
engraved is mounted
on this.

Rear

Power-cord connector
Tool carriage
Tool mounting screw
This secures the depth regulator
nose or tool adapter in place.
USB connector
This is for connecting a
USB cable.
 P. 21, "Connecting to the
Computer"
Control Panel
(Described on the
following page.)
Serial connector
This is for connecting a serial (RS-232C
compliant) cable.
 P. 21, "Connecting to the Computer"
Chapter 1 Getting Started
13