Clarion CX400 Owner's Manual page 37

Try reversing the connection direction of the device
(usually the brand name surface should be facing
left).
Disconnect the device and reconnect.
Disconnect the device and reconnect. If the device is
still not recognized, try replacing with a different
device.
According to the state of
operation on the device, the
communication fault is
caused.
The devices has been
inserted improperly.
Connectors are loose.
The device is damaged.
The MP3IWMNAAC files are Use only properly encoded MP3IWMNAAC files.
improperly encoded.
The files are not proper MP31 Use only properly encoded MP3IWMNAAC files.
WMNAAC format.
Connectors are loose. Disconnect the device and reconnect securely.
The device contains no MP31
WMNAAC files.
h~~:
; ,
+ - : - - - - - - - - f - - - - - - - - - - - - - t - - - - - - - - - - - - - - - - - - - - - - - J
;!m~:.
Can't insert the
j".::;
device.
t,;,:
The connector is broken. Replace with a new device.
CX400
37
Try reversing the connection direction of the device
(usually the brand name surface should be facing
left).
Disconnect the device and reconnect.
Disconnect the device and reconnect. If the device is
still not recognized, try replacing with a different
device.
According to the state of
operation on the device, the
communication fault is
caused.
The devices has been
inserted improperly.
Connectors are loose.
The device is damaged.
The MP3IWMNAAC files are Use only properly encoded MP3IWMNAAC files.
improperly encoded.
The files are not proper MP31 Use only properly encoded MP3IWMNAAC files.
WMNAAC format.
Connectors are loose. Disconnect the device and reconnect securely.
The device contains no MP31
WMNAAC files.
h~~:
; ,
+ - : - - - - - - - - f - - - - - - - - - - - - - t - - - - - - - - - - - - - - - - - - - - - - - J
;!m~:.
Can't insert the
j".::;
device.
t,;,:
The connector is broken. Replace with a new device.
CX400
37